Usa Sealing
Usa Sealing ZUSA-HT-2972 PVC tubing 3/4" I.D. 1" O.D. trap
Clear PVC tubing rated for food, beverage and water use at up to 100 psi and 140 °F
- ColorClear
- Clear PVC suits food, beverage and water lines
- Shore A 65 hardness balances flexibility with kink resistance
- 100 psi rating handles typical supply pressures
- Withstands 140 °F for hot-water service
- 5 ft coil ready to cut to length
Clear PVC tubing for fluid transfer
This clear PVC tubing handles beverage, food and water lines with a 3/4 inch inside diameter and 1 inch outside diameter. It is supplied in a 5 foot length and carries a Shore A 65 hardness rating. The material is compatible with food and beverage applications.
Sustained pressure and temperature performance
The tubing withstands a maximum operating pressure of 100 psi and a maximum operating temperature of 140 degrees Fahrenheit under continuous service. It is not rated for peristaltic pump use, so sustained mechanical compression should be avoided.
Simple push-fit installation notes
The flexible PVC construction allows the tube to be pushed over barbed fittings without specialised tools. Ensure the barb diameter matches the 3/4 inch bore to prevent leaks; the tubing has no reinforcing jacket, so over-tightening clamps can split the wall.
Highlights
- Clear PVC suits food, beverage and water lines
- Shore A 65 hardness balances flexibility with kink resistance
- 100 psi rating handles typical supply pressures
- Withstands 140 °F for hot-water service
- 5 ft coil ready to cut to length
Specifications
| Color | Clear |
|---|---|
| Brand | ZORO SELECT |
Questions about this item
Will the PVC stay flexible at 140 Degrees F during continuous use?
The tubing is rated for a maximum operating temperature of 140 Degrees F, so it remains serviceable at that level.
What fittings are required to connect the 3/4 in inside diameter tubing?
You need barbed or compression fittings sized for 3/4 in I.D. and 1 in O.D. to match the tube dimensions.
Can this clear PVC line replace an older rubber drain hose on the same 3/4 in ports?
Yes, the 3/4 in I.D. and 1 in O.D. match common drain ports, and the Shore A 65 hardness gives similar flexibility.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



