Usa Sealing
Usa Sealing ZUSA-HT-26 Reinforced Clear PVC Tubing 1/2" ID x 5/8" OD x 50 ft
Clear reinforced PVC tubing rated 100 psi and 140 °F for beverage, food and water transfer, 50 ft length with 1/2 in inside diameter
- ColorClear
- Clear tubing lets you spot blockages instantly
- 50 ft length covers long runs without splices
- Food-grade PVC approved for beverage and water lines
- 100 psi rating handles typical supply pressure
- Withstands 140 °F for hot-water use
Clear Reinforced PVC Tubing 50 ft
This reinforced clear PVC tubing is supplied in a 50 ft coil with a 1/2 in inside diameter and a 5/8 in outside diameter. It carries a maximum operating pressure of 100 psi and a maximum operating temperature of 140 Degrees F. The material has a Shore A hardness of 65 and is suitable for beverage, food and water applications.
Suits low-pressure food-grade lines.
Builders needing tubing for beverage dispensing, water transfer or food processing at pressures up to 100 psi will find this coil appropriate. The clear wall allows visual flow checks. It is not compatible with peristaltic pump systems and lacks a protective jacket for abrasive environments.
100 psi maximum operating pressure
The 100 psi pressure rating is the critical limit that determines whether this tubing matches the system design. Exceeding this value risks failure, so verify the circuit pressure before installation. The 140 Degrees F temperature ceiling and Shore A 65 hardness are secondary factors to confirm.
Highlights
- Clear tubing lets you spot blockages instantly
- 50 ft length covers long runs without splices
- Food-grade PVC approved for beverage and water lines
- 100 psi rating handles typical supply pressure
- Withstands 140 °F for hot-water use
Specifications
| Color | Clear |
|---|---|
| Brand | ZORO SELECT |
Questions about this item
How long can the tubing run at 140 °F before it softens?
The tubing is rated for continuous use up to 140 °F; above that temperature the PVC may lose stiffness and pressure capacity.
What heat or noise does the tubing add when fluid circulates all day?
The clear PVC tubing itself generates no heat and no noise; any temperature rise or sound comes from the pump and the fluid, not the hose.
Which fittings do I need to connect the 1/2 in. ID tubing?
Use barbed or push-to-connect fittings sized for 1/2 in. inside diameter and 5/8 in. outside diameter; clamps secure the joint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



