Usa Sealing
Usa Sealing ZUSA-HT-2166 Clear PVC Tubing 1 in ID 10 ft
Clear PVC tubing rated for food, dairy and beverage use with a 1 inch inside diameter and 80 psi working pressure
- ColorClear
- Clear visibility for flow monitoring thanks to transparent PVC construction
- Food-grade safety for dairy and beverage lines backed by NSF certification
- Resists kinking at 80 psi working pressure with reinforced wall design
- Handles hot water up to 140 Degrees F without softening
- Ten-foot coil length reduces joints in long plumbing runs
Clear PVC Tubing for Food and Beverage
This NSF-listed reinforced clear PVC tubing is manufactured for beverage, dairy, food and water applications. It has a 1 in inside diameter, a 1 1/4 in outside diameter and a 10 ft overall length. The material carries a Shore A 65 hardness rating and a maximum operating pressure of 80 psi.
Suited for Low-Pressure Food-Grade Lines
The tubing handles temperatures up to 140 Degrees F and is intended for gravity-flow or low-pressure transfer in food-processing environments. It is not compatible with peristaltic pumps and has no jacket, so installers who need pump-rated or jacketed hose should select a different product.
Ready-to-Install Coil with No Extra Fittings
The 10 ft coil arrives as a single length of clear tubing without attached couplings, clamps or barbs. Users cut the tubing to the required lengths and secure it with their own food-grade fittings, so no additional accessories or software are included.
Highlights
- Clear visibility for flow monitoring thanks to transparent PVC construction
- Food-grade safety for dairy and beverage lines backed by NSF certification
- Resists kinking at 80 psi working pressure with reinforced wall design
- Handles hot water up to 140 Degrees F without softening
- Ten-foot coil length reduces joints in long plumbing runs
Specifications
| Color | Clear |
|---|---|
| Brand | ZORO SELECT |
Questions about this item
What pump or fitting do I need to connect to the 1 in inside diameter?
Use barbed or compression fittings sized for a 1 in ID and 1 1/4 in OD hose; secure with clamps rated for up to 80 psi working pressure.
Can I run this tubing alongside my existing 3/4 in garden hose without pressure loss?
The 1 in bore gives higher flow capacity than a 3/4 in line, so it will not restrict the older hose; both must stay within the 80 psi limit.
How do I confirm the tubing is rated for 140 Degrees F after installation?
Check the printed markings for the 140 Degrees F maximum temperature and 80 psi pressure rating; the clear wall lets you see flow and any heat-related clouding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



