Usa Sealing
Usa Sealing ZUSA-HT-2163 NSF Reinforced Clear PVC Tubing 10 ft
Clear PVC tubing for beverage, dairy and water lines, NSF listed, 10 ft length, 1/2 in ID, 130 psi at 140 °F
- ColorClear
- NSF certified for safe food and beverage contact
- Reinforced PVC handles up to 130 psi working pressure
- Operates reliably at temperatures up to 140 Degrees F
- Shore A 65 hardness balances flexibility with kink resistance
- 10 ft length suits a variety of plumbing runs
What the tubing is and who it is for
ZUSA-HT-2163 is a ten foot length of NSF certified reinforced clear PVC tubing designed for beverage dairy and water transfer. The half inch inside diameter and three quarter inch outside diameter suit low pressure fluid lines in food service or light industrial settings. It is not for buyers who need peristaltic pump compatibility or a jacketed hose for abrasion protection.
What to check on your existing setup before ordering
Verify that your system operates at or below 130 psi and 140 degrees Fahrenheit to stay within the rated limits. Confirm that the half inch ID matches your barbed fittings or clamps so the line seals without adapters. Ensure the Shore A 65 hardness provides the flexibility your routing requires.
How it behaves under sustained load
The reinforced PVC wall resists creep when held at the maximum 130 psi for extended periods rather than only during short pressure spikes. The material maintains clarity and does not cloud after repeated exposure to 140 degree Fahrenheit washdown cycles. Shore A 65 hardness keeps the tube from kinking during continuous flow in fixed installations.
Highlights
- NSF certified for safe food and beverage contact
- Reinforced PVC handles up to 130 psi working pressure
- Operates reliably at temperatures up to 140 Degrees F
- Shore A 65 hardness balances flexibility with kink resistance
- 10 ft length suits a variety of plumbing runs
Specifications
| Color | Clear |
|---|---|
| Brand | ZORO SELECT |
Questions about this item
What does the 10 ft length include and are any fittings supplied?
The tubing is supplied as a single 10 ft coil of clear PVC with 1/2 in inside diameter and 3/4 in outside diameter. No fittings, clamps or jackets are included; these must be purchased separately.
Which diameter and pressure rating should I select for a 130 psi beverage line?
This model has a 1/2 in inside diameter, 3/4 in outside diameter and a maximum operating pressure of 130 psi, matching the requirement. Other sizes or pressure classes are not covered by this listing.
How does the 140 °F temperature limit affect use in a hot water circulation loop?
The tubing is rated to a maximum operating temperature of 140 °F. Continuous exposure above this temperature will exceed the specification and may reduce service life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



