We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear reinforced PVC tubing coiled for beverage and food use

Usa Sealing

Usa Sealing ZUSA-HT-2114 NSF Reinforced Clear PVC Tubing

SKU CH-80VR-BAR5S

Clear PVC tubing rated for 100 psi and 140 °F, NSF-listed for beverage and dairy use

  • ColorClear
  • NSF certified for safe food and beverage contact
  • Reinforced PVC handles 100 psi working pressure
  • Operates up to 140 °F for hot liquid lines
  • Shore A 65 hardness keeps shape under vacuum
  • 100 ft coil reduces joints in long runs

ZUSA-HT-2114 NSF Reinforced Clear PVC Tubing

This 100 ft coil of clear PVC tubing is built for beverage, dairy, food and water lines. NSF listed and rated to 100 psi at 140 °F, it meets sanitary requirements for potable and food-contact systems.

1/2 in ID with 100 psi headroom

The 1/2 inch inside diameter and 5/8 inch outside diameter handle typical low-pressure dispensing and transfer duties. Shore A 65 hardness gives enough flexibility for routing while resisting kinking up to the 100 psi limit.

Not for peristaltic pumps or high-heat service

The tubing is not compatible with peristaltic pumps and the 140 °F maximum temperature rules out steam cleaning or continuous hot-water circulation. Buyers needing pump-rated or higher-temperature hose should specify a different product.

Highlights

  • NSF certified for safe food and beverage contact
  • Reinforced PVC handles 100 psi working pressure
  • Operates up to 140 °F for hot liquid lines
  • Shore A 65 hardness keeps shape under vacuum
  • 100 ft coil reduces joints in long runs

Specifications

ColorClear
BrandZORO SELECT

Questions about this item

Will the 1/2 in inside diameter match my existing 1/2 in barbed fittings?

The 1/2 in inside diameter fits standard 1/2 in barbed fittings; the 5/8 in outside diameter and Shore A 65 hardness give a secure grip when clamped.

How can I confirm the tubing handles 100 psi at 140 Degrees F after installation?

Pressurise the line to the working pressure and inspect for leaks or ballooning; the NSF-listed PVC is rated for 100 psi maximum operating pressure at 140 Degrees F.

Does the 100 ft coil include clamps or fittings, or must I buy them separately?

The box contains only the 100 ft clear PVC tubing; clamps, barbed fittings and cutting tools are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.