We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear silicone tubing coil, 5 ft length, smooth glossy finish

Usa Sealing

Usa Sealing ZUSA-HT-1629 FDA Silicone Tubing 3/4" ID x 1" OD x 5 ft

SKU CH-HVFS-GB8KQ

FDA-compliant clear silicone tubing for beverage, dairy and water lines, rated to 40 psi and 480 °F with Shore A 70 hardness

  • FDA-compliant silicone for safe food and beverage contact
  • Withstands up to 480 °F for high-temperature processes
  • Rated to 40 psi maximum operating pressure
  • Shore A 70 hardness balances flexibility and durability
  • Compatible with peristaltic pumps for fluid transfer

5 ft FDA silicone tubing

This clear silicone tube measures 3/4 in inside diameter and 1 in outside diameter across a 5 ft length. It carries FDA clearance for beverage, dairy and food contact and is rated for peristaltic pump use. The Shore A 70 hardness gives a firm but flexible wall. It operates up to 40 psi and 480 Degrees F.

Food-grade fluid transfer

Suits breweries, dairies, beverage lines and laboratory peristaltic pumps that need a transparent, high-temperature hose. Not for hydraulic circuits above 40 psi, steam lines exceeding 480 Degrees F, or installations that require a reinforced jacket or a different inner diameter.

40 psi maximum working pressure

The 40 psi limit is the single figure that decides fit. Systems running higher pressure must choose a reinforced or alternative hose; systems at or below this level can use the tube within its temperature range.

Highlights

  • FDA-compliant silicone for safe food and beverage contact
  • Withstands up to 480 °F for high-temperature processes
  • Rated to 40 psi maximum operating pressure
  • Shore A 70 hardness balances flexibility and durability
  • Compatible with peristaltic pumps for fluid transfer

Specifications

BrandZORO SELECT

Questions about this item

Will the 3/4 in ID silicone tubing fit over my existing 3/4 in barbed fittings without leaks?

The 3/4 in inside diameter matches standard 3/4 in barbed fittings; secure with appropriate clamps for a leak-free seal at up to 40 psi.

How can I verify the tubing handles 480 Degrees F during my first steam cleaning cycle?

The tubing is rated for a maximum operating temperature of 480 Degrees F; monitor for softening or deformation during initial high-heat exposure to confirm performance.

Does the 5 ft clear silicone length ship ready to install, or do I need separate clamps and fittings?

The box contains a single 5 ft length of clear silicone tubing; clamps, barbed fittings and any cutting tools must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.