We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PVC tubing, 1 inch inside diameter, 10 foot coil

Usa Sealing

Usa Sealing ZUSA-HT-126 Clear PVC Tubing 1in ID 10ft

SKU CH-ZF8T-P67R3

Clear PVC tubing for beverage, food and water use, 1 in inside diameter, 10 ft length, 15 psi maximum pressure, 140 °F maximum temperature, Shore A 65 hardness

  • ColorClear
  • Clear tubing lets you inspect flow visually
  • Food-grade PVC approved for beverage and water contact
  • Shore A 65 hardness balances flexibility with kink resistance
  • 15 psi working pressure suits low-pressure dispensing systems
  • Withstands temperatures up to 140 °F for warm liquid transfer

What this clear PVC tubing does

This clear PVC tubing carries beverages, food products or water at up to 15 psi and 140 degrees Fahrenheit. The one-inch inside diameter and 10-foot length suit low-pressure transfer lines in food-service or laboratory settings.

Installation notes and common issues

Cut the tubing to length with a sharp knife and push it over barbed fittings; clamps are optional at the rated pressure. The material has a Shore A 65 hardness, so it resists kinking but can stiffen in cold conditions, making tight bends harder to form.

Check your system before ordering

Verify that your fittings accept a 1-1/4-inch outside diameter and that operating pressure stays at or below 15 psi. The tubing is not compatible with peristaltic pumps and has no jacket, so confirm the application does not require abrasion protection or reinforced walls.

Highlights

  • Clear tubing lets you inspect flow visually
  • Food-grade PVC approved for beverage and water contact
  • Shore A 65 hardness balances flexibility with kink resistance
  • 15 psi working pressure suits low-pressure dispensing systems
  • Withstands temperatures up to 140 °F for warm liquid transfer

Specifications

ColorClear
BrandZORO SELECT

Questions about this item

How can I verify the clear PVC tubing is flowing correctly after installation?

Check that liquid moves smoothly through the 1 in inside diameter at up to 15 psi without leaks or kinks, and confirm the tubing remains clear up to 140 degrees F during use.

What comes with the ZUSA-HT-126 tubing and what must I supply separately?

The package includes a 10 ft length of clear PVC tubing with 1 in ID and 1-1/4 in OD; fittings, clamps, or peristaltic pump adapters are not included and must be purchased separately.

Which version of the clear PVC tubing should I choose for food and beverage use?

Select the ZUSA-HT-126 with Shore A 65 hardness, 1 in inside diameter, and 10 ft length — it is rated for food, beverage, and water applications at 15 psi and 140 degrees F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.