Usa Sealing
Usa Sealing ZUSA-HT-1160 PVC Tubing Clear 3/8 ID 1/2 OD 10 ft
Clear PVC tubing for beverage, food and water lines, 10 ft length with 3/8 in ID and 1/2 in OD, rated to 20 psi and 140 °F
- ColorClear
- Clear tubing lets you monitor flow visually
- Food-grade PVC approved for beverage and water contact
- Shore A 60 hardness resists kinking during use
- Rated to 20 psi at 140 °F for reliable pressure handling
- 10 ft length fits peristaltic pump installations
Clear PVC Tubing for Food and Beverage Use
This clear PVC tubing is manufactured for beverage, food and water transfer. The 3/8 inch inside diameter and 1/2 inch outside diameter suit peristaltic pump systems and general fluid handling. It comes in a 10 foot length for flexible installation.
Shore A 60 Hardness With 20 psi Pressure Rating
The material carries a Shore A 60 hardness rating and a maximum operating pressure of 20 psi. It withstands temperatures up to 140 degrees Fahrenheit during normal operation. No jacket is present on the tubing.
Peristaltic Pump Compatibility
Peristaltic pump compatibility allows direct use in dispensing and metering equipment. The clear construction lets operators visually confirm flow and cleanliness. Buyers needing higher pressure ratings or different diameters should look elsewhere.
Highlights
- Clear tubing lets you monitor flow visually
- Food-grade PVC approved for beverage and water contact
- Shore A 60 hardness resists kinking during use
- Rated to 20 psi at 140 °F for reliable pressure handling
- 10 ft length fits peristaltic pump installations
Specifications
| Color | Clear |
|---|---|
| Brand | ZORO SELECT |
Questions about this item
How do I install the 3/8" ID PVC tubing onto a fitting without kinking it?
Warm the tubing slightly in hot water, push it fully over the barbed fitting until it seats against the shoulder, and secure with a hose clamp; the common mistake is forcing cold tubing which creates a permanent bend.
When should I replace the clear PVC tubing in a food-grade application?
Replace the tubing when the surface turns cloudy, develops micro-cracks, or loses flexibility — Shore A 60 material typically shows these signs after repeated 140 °F sanitising cycles.
What pressure limit will I hit first if I run this tubing continuously on a peristaltic pump?
The 20 psi maximum operating pressure is the limiting factor; sustained pump pressure above that rating will cause the 1/2" OD tube to balloon and eventually burst.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



