We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PVC tubing coil 1/2 inch ID 5/8 inch OD 25 ft

Usa Sealing

Usa Sealing ZUSA-HT-1146 PVC Tubing 1/2" ID x 5/8" OD x 25 ft

SKU CH-Z7C7-ZJY3F

Clear PVC tubing rated for food, beverage and water use, 25 ft length with 1/2 in inside diameter and 5/8 in outside diameter, 20 psi maximum pressure at 140 °F, Shore A 60 hardness.

  • ColorClear
  • Clear PVC resists contamination for food and beverage lines
  • Shore A 60 hardness balances flexibility with kink resistance
  • Rated to 20 psi at 140 °F for reliable low-pressure service
  • Peristaltic-pump compatible for precise fluid dispensing
  • 25 ft coil provides ample length for bench or production runs

ZUSA-HT-1146 Clear PVC Tubing for Fluid Transfer

This 25-foot length of clear PVC tubing has a 1/2-inch inside diameter and a 5/8-inch outside diameter. It is rated for a maximum operating pressure of 20 psi and a maximum temperature of 140 degrees Fahrenheit. The material carries a Shore A hardness of 60 and is compatible with peristaltic pump use. It is designed for beverage, food, and water applications.

Suited for Low-Pressure Food-Grade Lines Not

This tubing suits operators who need a clear, flexible line for low-pressure food, beverage, or water transfer where visual flow monitoring is helpful. It is not for installers who require higher pressure ratings, elevated temperature limits beyond 140 degrees Fahrenheit, or reinforced wall construction for vacuum or suction service.

Simple Push-Fit Installation Watch for Kinking

The flexible PVC construction allows the tubing to be pushed onto barbed fittings and secured with standard clamps for a quick, tool-light setup. The clear wall lets you confirm full seating and spot air bubbles during priming. The main issues are kinking on tight bends, which restricts flow, and clamp loosening over time if the connection is subjected to vibration or thermal cycling.

Highlights

  • Clear PVC resists contamination for food and beverage lines
  • Shore A 60 hardness balances flexibility with kink resistance
  • Rated to 20 psi at 140 °F for reliable low-pressure service
  • Peristaltic-pump compatible for precise fluid dispensing
  • 25 ft coil provides ample length for bench or production runs

Specifications

ColorClear
BrandZORO SELECT

Questions about this item

What size barbed fitting matches the 1/2 in inside diameter of this PVC tubing?

Use barbed fittings sized for 1/2 in ID hose so the tubing seats fully over the barb and seals without stretching beyond the 5/8 in OD.

Will the 20 psi maximum operating pressure of this tubing handle typical residential water supply pressure?

Standard household water pressure often exceeds 20 psi, so this tubing is not suitable for permanent supply lines; it is rated for low-pressure beverage, food and water transfer only.

How can I confirm the tubing stays flexible and leak-free after installing it on a peristaltic pump?

Run the pump at operating speed and watch for steady flow, no hardening at the roller contact points, and no drips at the 1/2 in ID connections over several hours.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.