We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow PVC fuel tubing coil, 10 ft length, 1/8 in ID, 1/4 in OD

Usa Sealing

Usa Sealing PVC fuel tubing 1/8 in ID 1/4 in OD 10 ft yellow

SKU CH-XK7Z-8BBZB

PVC tubing carries fuel, lubricant or water at up to 20 psi and 140 °F

  • ColorYellow
  • Handles fuels, lubricants and water with one PVC line
  • Shore A 60 hardness resists hardening and swelling over time
  • 20 psi rating and 140 °F limit suit low-pressure systems
  • 10 ft coil of 1/8 in ID and 1/4 in OD for flexible routing
  • Yellow colour aids quick visual identification in busy engine bays

Fuel line for small-engine plumbing

This yellow PVC tubing handles fuels, lubricants and water in automotive and small-engine systems. The 10 ft length with a 1/8 in inside diameter and 1/4 in outside diameter suits gravity-feed and low-pressure circuits. It is peristaltic-pump compatible for metered dispensing.

Slips onto barbed fittings without clamps in many

Shore A 60 hardness keeps the bore from collapsing on tight bends while remaining flexible enough to route around engine components. The material resists hardening and swelling so the seal stays reliable after repeated heat cycles. No jacket means direct contact with the fluid path.

Rated for continuous use at 20 psi

Pressure and temperature limits are maximums, not burst ratings, so the tube maintains dimensions during long idling or recirculation runs. California Proposition 65 notices apply to this product.

Highlights

  • Handles fuels, lubricants and water with one PVC line
  • Shore A 60 hardness resists hardening and swelling over time
  • 20 psi rating and 140 °F limit suit low-pressure systems
  • 10 ft coil of 1/8 in ID and 1/4 in OD for flexible routing
  • Yellow colour aids quick visual identification in busy engine bays

Specifications

ColorYellow
BrandZORO SELECT

Questions about this item

Will the 20 psi pressure limit hold up during long fuel-line runs?

The tubing is rated for a maximum operating pressure of 20 psi, so sustained use must stay at or below that figure.

Does the PVC stay flexible and cool when fuel flows all day?

Rated to 140 °F with hardening- and swelling-resistant PVC, it resists heat-related stiffening during continuous operation.

What fittings do I need to connect the 1/8 in ID and 1/4 in OD ends?

Use barbed or compression fittings sized for 1/8 inch inside diameter and 1/4 inch outside diameter to match the tubing dimensions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.