We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PVC tubing coil, 3/8 inch inside diameter, 1/2 inch outside diameter, 25 ft length

Usa Sealing

Usa Sealing Clear PVC Tubing 3/8 ID x 1/2 OD 25 ft

SKU CH-P1WS-JMEQ1

Clear PVC tubing with 3/8 inch inside diameter and 1/2 inch outside diameter, rated for 20 psi at 140 °F and supplied in a 25 ft coil

  • ColorClear
  • Clear PVC resists kinking for reliable beverage and food transfer
  • Shore A 65 hardness balances flexibility with shape retention
  • 20 psi working pressure handles typical low-pressure dispensing systems
  • 140 °F maximum temperature suits hot water and sanitising cycles
  • 25 ft coil provides ample length for custom routing

Clear PVC Tubing for Beverage Use

This 25 ft length of clear PVC tubing is designed for beverage, dairy and water applications. The 3/8 in inside diameter and 1/2 in outside diameter suit low-pressure fluid transfer. It meets NSF and 3-A standards for food contact. The Shore A 65 hardness gives a firm yet flexible feel.

Peristaltic Pump Compatibility

The tubing is rated for use with peristaltic pumps, allowing it to handle metered dispensing without a separate jacket or reinforcement. This compatibility simplifies setup for dosing or recirculation tasks. No additional fittings or liner materials are required for pump operation.

Pressure and Temperature Limits

Maximum operating pressure is 20 psi and maximum operating temperature is 140 Degrees F. These limits rule out high-pressure or steam-cleaning environments. Buyers who need higher pressure ratings or sustained temperatures above this range should select a different tubing specification.

Highlights

  • Clear PVC resists kinking for reliable beverage and food transfer
  • Shore A 65 hardness balances flexibility with shape retention
  • 20 psi working pressure handles typical low-pressure dispensing systems
  • 140 °F maximum temperature suits hot water and sanitising cycles
  • 25 ft coil provides ample length for custom routing

Specifications

ColorClear
BrandZORO SELECT

Questions about this item

How often will I need to replace the clear PVC tubing if it runs at the 140 Degrees F maximum temperature?

At the 140 Degrees F maximum operating temperature the PVC material will age faster than at lower temperatures, so plan on inspecting the 25 ft length regularly and replacing it once the Shore A 65 hardness begins to change or the tube shows surface cracking.

What limit will I hit first when the tubing runs continuously at its 20 psi pressure rating?

The 20 psi maximum operating pressure is the first hard limit; sustained use at or above that pressure risks permanent deformation or burst, so keep the system pressure below 20 psi during all-day operation.

Does the tubing get hot or add noise when it runs all day in a peristaltic pump?

The PVC tubing itself does not generate heat or noise; any temperature rise comes from the fluid at up to 140 Degrees F and pump noise comes from the pump mechanism, not the 3/8 in ID clear tube.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.