Usa Sealing
Usa Sealing Clear PVC Tubing 1/2" ID x 3/4" OD 10 ft
Clear PVC tubing carries food, beverage and water at up to 20 psi and 140 °F
- ColorClear
- Clear tubing lets you spot blockages instantly
- Food-grade PVC rated for beverage and water lines
- Withstands 140 °F for hot-water supply runs
- Shore A 65 hardness keeps the tube kink-resistant
- Rated to 20 psi for low-pressure plumbing jobs
Clear PVC tubing for low-pressure fluid transfer
This clear PVC tubing suits beverage, food and water lines where visual flow checks matter. The 10 ft length covers typical bench or light-duty runs. Shore A 65 hardness keeps the bore stable without excessive stiffness. It is sold new and ready for immediate use.
Practical limits of the 20 psi / 140 °F rating
Maximum operating pressure is 20 psi and maximum temperature is 140 Degrees F. Above either limit the tube can deform, leak or burst. The material is not rated for peristaltic pumps, so roller compression will shorten life. No jacket or reinforcement is present, so external abrasion or kinking reduces the safe envelope further.
Installation notes and common issues
Cut the tubing square with a sharp knife, slide over barbed fittings and secure with clamps rated for the 3/4 in outside diameter. The clear wall lets you confirm full insertion and spot air bubbles. Common problems include kinking on tight bends, clamp over-tightening that splits the wall, and softening near the 140 °F ceiling causing blow-off.
Highlights
- Clear tubing lets you spot blockages instantly
- Food-grade PVC rated for beverage and water lines
- Withstands 140 °F for hot-water supply runs
- Shore A 65 hardness keeps the tube kink-resistant
- Rated to 20 psi for low-pressure plumbing jobs
Specifications
| Color | Clear |
|---|---|
| Brand | ZORO SELECT |
Questions about this item
Should I pick the 10 ft coil or a longer roll for my beverage line?
This listing supplies exactly 10 ft of clear PVC tubing; choose it when a single 10 ft run covers the distance, or add another coil if the route is longer.
What does the 20 psi pressure rating mean when the tube is on a peristaltic pump?
The tubing is not peristaltic-pump compatible, so the 20 psi maximum operating pressure applies only to gravity-fed or low-pressure push-through beverage and water lines.
How does the 1/2 in ID and 3/4 in OD affect flow with standard barbed fittings?
The 1/2 in inside diameter and 3/4 in outside diameter match common 1/2 in barbed fittings, giving a snug fit without clamps for food and beverage use up to 140 °F.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



