We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear silicone tubing coil 1/4 inch inside diameter 3/8 inch outside diameter 50 feet length

Usa Sealing

Usa Sealing 726 Silicone Tubing 1/4" ID x 3/8" OD 50 ft

SKU CH-25VD-TVYAN

Clear silicone tubing rated to 40 psi and 480 °F for beverage, dairy and water lines

  • FDA-compliant silicone for safe food and beverage contact
  • Withstands 480 Degrees F for demanding high-temperature use
  • 40 psi pressure rating handles fluid transfer reliably
  • Shore A 70 hardness resists kinking and deformation
  • 50 ft continuous length reduces joints and leak points

FDA-Compliant Silicone Tubing

This clear silicone tubing meets FDA requirements for beverage, dairy and food contact. It handles water and food-grade liquids at up to 480 degrees F and 40 psi. The 50-foot coil has a 1/4-inch inside diameter and 3/8-inch outside diameter with a Shore A 70 hardness rating.

Replaces Non-Food-Grade Hose

Standard rubber or PVC hose cannot withstand the same temperature range or meet food-safety standards. Switching is justified when the line carries consumable fluids or sees repeated hot cleaning cycles. The tubing is also compatible with peristaltic pumps for metered dispensing.

Suits Food-Processing and Lab Lines

Breweries, dairies, beverage plants and laboratories needing clear, high-temperature silicone will find it fit for purpose. Operations requiring higher pressure ratings, reinforced walls or non-silicone materials should evaluate alternative hose types.

Highlights

  • FDA-compliant silicone for safe food and beverage contact
  • Withstands 480 Degrees F for demanding high-temperature use
  • 40 psi pressure rating handles fluid transfer reliably
  • Shore A 70 hardness resists kinking and deformation
  • 50 ft continuous length reduces joints and leak points

Specifications

BrandZORO SELECT

Questions about this item

What inner and outer diameters does the 1/4" ID x 3/8" OD tubing need for a proper fit?

The tubing has a 1/4 inch inside diameter and a 3/8 inch outside diameter, so fittings or barbs must match those dimensions for a secure connection.

How is the clear silicone tubing installed on barbed fittings, and what common step is missed?

Slide the tubing over the barbed fitting until it seats fully against the base; the step often missed is warming the tubing slightly so it expands enough to pass the barb without tearing.

When should the 50 ft roll be replaced in a peristaltic pump system?

Replace the tubing when it loses elasticity, shows surface cracking, or hardens beyond the Shore A 70 rating, as worn tubing reduces pump accuracy and risks contamination.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.