We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear polyethylene tubing coil, 50 ft length

Usa Sealing

Usa Sealing 3316 Clear Polyethylene Tubing 1/2 in ID 5/8 in OD 50 ft

SKU CH-ZM70-0HF6F

Clear polyethylene tubing for beverage, food and water lines, 50 ft long with 1/2 in ID, 5/8 in OD, 290 psi pressure rating and 140 Degrees F temperature limit

  • ColorClear
  • Clear tubing lets you spot flow issues instantly
  • Shore D 45 hardness balances flexibility with kink resistance
  • 290 psi rating handles demanding fluid-transfer tasks
  • Withstands 140 °F for hot water and beverage lines
  • 50 ft coil reduces joints in long plumbing runs

What this tubing does

This clear polyethylene tubing suits beverage, food and water lines. It measures 1/2 in inside diameter and 5/8 in outside diameter across a 50 ft coil. The material carries a Shore D 45 hardness rating and resists chemicals.

Check before ordering

Verify the 1/2 in ID and 5/8 in OD match your fittings. Confirm the 290 psi maximum operating pressure covers your system. Ensure the 140 Degrees F temperature limit meets the fluid temperature. Note the tubing is not peristaltic pump compatible.

Behaviour under sustained load

The Shore D 45 polyethylene holds its shape at the rated 290 psi during continuous use. Chemical resistance remains stable over long runs. The clear wall allows visual flow checks without disassembly. Maximum operating temperature stays at 140 Degrees F.

Highlights

  • Clear tubing lets you spot flow issues instantly
  • Shore D 45 hardness balances flexibility with kink resistance
  • 290 psi rating handles demanding fluid-transfer tasks
  • Withstands 140 °F for hot water and beverage lines
  • 50 ft coil reduces joints in long plumbing runs

Specifications

ColorClear
BrandZORO SELECT

Questions about this item

What comes with the 50 ft polyethylene tubing and what must I buy separately?

The box contains 50 ft of clear polyethylene tubing with a 1/2 in inside diameter and 5/8 in outside diameter. Fittings, clamps or cutting tools are not included and must be purchased separately.

How do I choose between the listed specifications for this tubing?

This item is sold as a single specification: 1/2 in ID, 5/8 in OD, 50 ft length, clear polyethylene, Shore D 45 hardness, rated to 290 psi and 140 °F. There are no alternate versions or capacities to select.

What does the 290 psi rating mean when the tubing is installed in a real system?

The 290 psi figure is the maximum operating pressure the tubing can handle at its rated temperature of 140 °F. Design your system so normal pressure stays below this limit with a safety margin.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.