We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear PVC tubing coil 50 ft 3/4 in ID 1 in OD

Usa Sealing

Usa Sealing 2229 Clear PVC Tubing 3/4" ID 1" OD 50 ft

SKU CH-GYQM-BRE98

Clear PVC tubing for beverage, food and water lines, 50 ft length with 15 psi rating and 140 °F maximum temperature

  • ColorClear
  • Clear tubing lets you spot blockages instantly
  • Food-grade PVC approved for dairy, beverage and water lines
  • Shore A 65 hardness resists kinking during peristaltic pump use
  • 50 ft coil covers long runs without extra fittings
  • Rated to 15 psi and 140 °F for reliable low-pressure service

Clear PVC Tubing for Food and Beverage

This clear PVC tubing is designed for beverage, dairy and water lines. It meets NSF and 3A standards for food contact. The 50 ft coil provides a continuous run for dispensing or transfer systems.

Suits low-pressure fluid transfer.

The tubing handles up to 15 psi at 140 degrees F, so it fits gravity-fed or peristaltic pump setups. Installations needing higher pressure, steam service or compressed air should select a reinforced hose instead.

Shore A 65 hardness sets flexibility

A 65 durometer gives the tubing enough stiffness to resist collapse under vacuum while staying pliable for tight routing. If the application demands a softer feel or a harder wall, a different durometer is required.

Highlights

  • Clear tubing lets you spot blockages instantly
  • Food-grade PVC approved for dairy, beverage and water lines
  • Shore A 65 hardness resists kinking during peristaltic pump use
  • 50 ft coil covers long runs without extra fittings
  • Rated to 15 psi and 140 °F for reliable low-pressure service

Specifications

ColorClear
BrandZORO SELECT

Questions about this item

How do I install the 3/4 in ID PVC tubing and what step is often missed?

Cut the 50 ft length to size, slide over 3/4 in barbed fittings, and secure with clamps; the step often missed is warming the tubing in hot water first so it seats fully without kinking.

What maintenance or replacement will the clear PVC tubing need later?

Inspect regularly for clouding, surface cracking or loss of flexibility caused by plasticiser migration; replace any section that shows hardening or permanent deformation to maintain the 15 psi rating.

What limit appears first during sustained use at the 140 °F maximum temperature?

The 15 psi pressure rating drops as the material softens near 140 °F, so pressure capacity is the first limit reached under continuous high-temperature operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.