We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow PVC tubing coil, 1/4 inch ID, 3/8 inch OD, 10 ft length

Usa Sealing

Usa Sealing 1222 PVC tubing trap 1/4" ID x 3/8" OD 10 ft

SKU CH-CFTR-0YKAP

Yellow PVC tubing rated for beverage, food, fuel and water with 1/4 in. ID, 3/8 in. OD, 20 psi pressure limit and 150 °F temperature limit

  • ColorYellow
  • 10 ft coil handles long runs without joints
  • 20 psi rating suits low-pressure fluid lines
  • Shore A 55 compound resists hardening and swelling
  • 3-A and FDA compliance covers food and beverage use
  • .06 in wall thickness provides consistent flow control

PVC tubing for fuel and lubricant lines

This 10 ft length of yellow PVC tubing is made for conveying fuels, lubricants, beverages, water and food products. The 1/4 in inside diameter and 3/8 in outside diameter suit low-pressure fluid transfer in automotive, marine or workshop settings. It meets 3-A and FDA standards for food-contact applications.

Pressure and temperature limits define safe use

Maximum operating pressure is 20 psi and maximum operating temperature is 150 Degrees F. The Shore A 55 hardness gives a semi-rigid feel that resists hardening and swelling over time. Exceeding either limit risks leaks, deformation or premature failure of the tube wall.

The 1/4 in inside diameter decides fit

Only systems that require exactly this bore will seal correctly on the matching fittings. Builders needing a larger or smaller flow path must select a different tube size. The .06 in wall thickness and 10 ft coil length are fixed for this part.

Highlights

  • 10 ft coil handles long runs without joints
  • 20 psi rating suits low-pressure fluid lines
  • Shore A 55 compound resists hardening and swelling
  • 3-A and FDA compliance covers food and beverage use
  • .06 in wall thickness provides consistent flow control

Specifications

ColorYellow
BrandZORO SELECT

Questions about this item

Which tubing length is offered for this 1/4 in ID PVC?

The coil is supplied as a single 10 ft length of yellow PVC tubing with 1/4 in inside diameter and 3/8 in outside diameter.

What does the 20 psi rating mean when the tube is installed?

It is the maximum continuous operating pressure the PVC wall can handle at up to 150 °F; exceeding it risks swelling or hardening of the tube.

How does the Shore A 55 hardness affect the tubing in use?

A 55 Shore A rating means the PVC stays flexible enough for tight bends while resisting kinking and swelling in fuel, water or beverage lines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.