US Cargo Control
US Cargo Control GVEB34X15 Eye Bolt 3/4 in 15 in Shank 1-1/2 in ID Steel
Steel eye bolt with a 15 in shank, 3/4 in thread and 1-1/2 in inside diameter for heavy lifting
- TypeScrews & Bolts
- 3/4 in diameter eye bolt provides strong attachment point
- 15 in shank length allows deep through-hole fastening
- 1-1/2 in inside diameter fits large hooks or shackles
- Steel construction delivers high tensile strength for heavy loads
- California Proposition 65 warning indicates chemical safety disclosure
US Cargo Control GVEB34X15 Eye Bolt
This forged steel eye bolt provides a fixed anchor point for lifting or securing loads. The 3/4 inch thread diameter and 15 inch shank length suit applications that require deep engagement in timber or structural steel. It is intended for rigging professionals and industrial maintenance teams who need a rated attachment point.
Build quality and daily use
The steel body resists deformation under tension and the 1-1/2 inch inside diameter eye accepts large hooks, shackles or synthetic slings without binding. A continuous thread along the shank allows full nut engagement or direct insertion into a tapped hole. The uncoated finish will show surface oxidation over time, so inspect threads before each critical lift.
Deciding specification
The 3/4 inch thread diameter is the single figure that determines compatibility with your existing hardware or tapped holes. If your mounting point calls for a different thread size this bolt will not fit. Buyers who need a smaller or larger diameter should select a different model.
Highlights
- 3/4 in diameter eye bolt provides strong attachment point
- 15 in shank length allows deep through-hole fastening
- 1-1/2 in inside diameter fits large hooks or shackles
- Steel construction delivers high tensile strength for heavy loads
- California Proposition 65 warning indicates chemical safety disclosure
Specifications
| Brand | US CARGO CONTROL |
|---|---|
| Type | Screws & Bolts |
Questions about this item
What thread size does the 3/4 in eye bolt use?
The eye bolt has a 3/4 in diameter shank that provides the thread size for mounting.
What clearance does the 1-1/2 in inside diameter eye provide?
The 1-1/2 in inside diameter eye allows hooks, shackles or rope up to that width to pass through.
How deep must the receiving hole be for the 15 in shank?
Drill or tap a hole at least 15 in deep so the full shank engages; stopping short leaves threads exposed and reduces holding strength.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
