We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains Silicone Tubing 6mm ID 8mm OD 1m Clear

SKU CH-8TN0-YQEVP

Clear silicone tubing with a 1 mm wall, rated from -76 °F to +428 °F and 65 Shore A hardness, suits pump, transfer and siphoning tasks

  • Operating range from -76°F to +428°F
  • 1 metre length suits pump and transfer tasks
  • Clear silicone shows fluid flow instantly
  • 65° Shore A hardness keeps tube flexible
  • 1 mm wall thickness balances strength and bend

Clear Silicone Tubing for Fluid Transfer

This 1 metre length of clear silicone tubing has a 6 mm inner diameter and 8 mm outer diameter with a 1 mm wall. It suits hobbyists, technicians and maintenance staff who need a flexible, non-reactive line for pump and transfer tasks.

Temperature Resistant Flexible Construction

The tubing operates from -76 °F to 428 °F and carries a 65 degree hardness rating, remaining pliable across that range. Its clear silicone rubber resists degradation and lets you visually confirm flow without disassembly.

Verify Dimensions and Chemical Compatibility

Confirm the 6 mm inner diameter matches your barb or fitting size before ordering. Ensure the fluids you plan to move are compatible with silicone rubber, as the material is not suited to every solvent or oil type.

Highlights

  • Operating range from -76°F to +428°F
  • 1 metre length suits pump and transfer tasks
  • Clear silicone shows fluid flow instantly
  • 65° Shore A hardness keeps tube flexible
  • 1 mm wall thickness balances strength and bend

Specifications

BrandUnique Bargains

Questions about this item

What temperature range does the 6 mm ID silicone tubing handle?

The tubing operates from -76 °F to +428 °F, covering most pump and transfer duties.

What wall thickness must a fitting accommodate for the 8 mm OD tube?

Wall thickness is 1 mm (0.04 in), so barbs or push-fit fittings need to seat against that dimension.

How do you cut and fit the 1 m clear tube without kinking it?

Measure the run, cut square with a sharp knife, warm the end in hot water, then push onto the barb; forcing a cold end causes kinks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.