We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear flexible silicone tube 1 metre long 4.8mm bore 8mm outside diameter

Unique-Bargains

Unique-Bargains Silicone Tubing 4.8mm ID x 8mm OD 1m Clear

SKU CH-TFCZ-1RMV0

Clear silicone tubing with a 4.8 mm inner diameter and 1.6 mm wall thickness, rated from -76 °F to +428 °F for pump and transfer use

  • Clear tubing lets you see flow inside
  • Withstands -76 °F to +428 °F for extreme environments
  • 65 Shore A hardness keeps shape under pressure
  • 6 mm wall gives strength without bulk
  • Soft silicone rubber resists kinks in pump and transfer lines

Clear Silicone Tubing for Pump and Transfer Use

This clear silicone tubing has a 4.8 mm inner diameter and 8 mm outer diameter with a 1.6 mm wall thickness. It is supplied in a 1 m length for fluid and air transfer tasks. The soft, flexible rubber construction is nonreactive and suits a variety of pump connections and machinery piping.

Temperature Range and Pressure Limits

The tubing withstands continuous temperatures from -76 °F to +428 °F without degrading. Its Shore A hardness of 65 degrees gives a firm yet pliable feel that resists kinking during siphoning or draining. Without a stated pressure rating it is not suited for high-pressure hydraulic circuits or compressed-air mains.

Capacity and Practical Headroom

The 4.8 mm bore handles water, oil and coolant changes in small engines and lab equipment with ease. It fits standard barbed fittings for electrical casings and low-pressure pump lines. The 1 m coil runs out quickly on long runs or multi-port manifolds where longer continuous lengths are required.

Highlights

  • Clear tubing lets you see flow inside
  • Withstands -76 °F to +428 °F for extreme environments
  • 65 Shore A hardness keeps shape under pressure
  • 6 mm wall gives strength without bulk
  • Soft silicone rubber resists kinks in pump and transfer lines

Specifications

BrandUnique Bargains

Questions about this item

Should I choose a different inner diameter or length for my pump setup?

This listing is for a single 1m length with a 4.8mm inner diameter and 8mm outer diameter. If your fittings or flow requirements differ, you would need a separate tube size.

What does the 65-degree hardness mean once the tube is installed?

A 65 Shore A rating gives a soft, flexible feel that bends easily around fittings without kinking, yet holds its shape under the pressure of typical pump and transfer jobs.

What temperature range can this silicone hose actually handle in use?

It is rated from -76°F to +428°F, so it stays pliable in freezing conditions and resists degradation in hot fluid or air transfer applications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.