We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear flexible silicone tube 10mm inner 13mm outer 2m length

Unique-Bargains

Unique-Bargains Silicone Tubing 10mm ID 13mm OD 2m Clear

SKU CH-DHCF-7BE6B

Clear silicone tube with 10 mm inner and 13 mm outer diameter, 2 m length, withstands -76 °F to 428 °F

  • Clear tubing lets you monitor flow visually
  • Withstands -76 °F to +428 °F for extreme environments
  • 5 mm wall balances strength and flexibility
  • 65 Shore A hardness resists kinking under pressure
  • 2 m length suits pump, transfer and drain tasks

Clear Silicone Tubing for Pump and Transfer Use

This clear silicone tubing has a 10 mm inner diameter and 13 mm outer diameter with a 1.5 mm wall thickness. It comes in a 2 m length and is made from flexible silicone rubber rated for -76 °F to +428 °F at 65 degree hardness. The material is nonreactive and suits water, oil, siphoning and machinery connections.

Suitable for General Fluid Transfer and Insulation

Buyers needing a flexible, high-temperature tube for pump transfer, siphoning, draining or electrical casing will find this diameter and length fit those tasks. It is not for anyone who requires a different inner diameter, a longer continuous run or a certified food-grade or medical specification.

Check Diameter and Temperature Fit Before Ordering

Verify that your fittings accept a 10 mm inner diameter and 13 mm outer diameter before purchasing. Confirm the operating range of -76 °F to +428 °F covers the fluids and environment in your application. Ensure the 2 m length is sufficient for the intended routing.

Highlights

  • Clear tubing lets you monitor flow visually
  • Withstands -76 °F to +428 °F for extreme environments
  • 5 mm wall balances strength and flexibility
  • 65 Shore A hardness resists kinking under pressure
  • 2 m length suits pump, transfer and drain tasks

Specifications

BrandUnique Bargains

Questions about this item

What pump or fitting size matches the 10 mm inner diameter of this tubing?

The tube has a 10 mm inner diameter and 13 mm outer diameter, so use barbed fittings or push-to-connect couplers sized for 10 mm ID hose.

Will the 1.5 mm wall stay flexible when I route it next to older rubber hoses rated for lower heat?

Yes — the silicone remains soft from −76 °F to +428 °F and handles 65 Shore A hardness, so it bends easily beside legacy hoses without kinking.

How can I confirm the 2 m length and clear bore are correct after I uncoil it?

Measure the relaxed tube — it should read 6.56 ft (2 m) end-to-end — and verify you can see straight through the 10 mm clear bore.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.