We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear flexible silicone tube 8mm inside 11mm outside 2m length

Unique-Bargains

Unique-Bargains Silicone Hose 8mm ID 11mm OD 2m Clear

SKU CH-5SCZ-2S5PS

Clear silicone tubing, 8 mm bore by 11 mm outside diameter, 2 m long with 1.5 mm wall, rated from -76 °F to 428 °F and 65 hardness for pump and transfer use

  • Handles extreme cold down to -76 °F for reliable outdoor use
  • Withstands high heat up to 428 °F without softening
  • Clear wall lets you see flow and blockages instantly
  • Soft 65 Shore A silicone bends tightly without kinking
  • Two-metre length covers most pump and transfer runs

Clear Silicone Tubing 8 mm ID

This clear silicone tube has an 8 mm inner diameter and 11 mm outer diameter with a 1.5 mm wall. It is made from flexible, non-reactive silicone rubber rated for -76 °F to +428 °F. The 2 m length suits pump and fluid transfer tasks. It is not for buyers who need a smaller or larger bore.

Temperature and Chemical Limits

The material withstands continuous exposure from -76 °F to +428 °F without hardening or degrading. Silicone rubber resists water, oil and many common fluids but is not rated for fuel, strong solvents or high-pressure hydraulic lines. Hardness measures 65 Shore A. It is not for systems that exceed the stated temperature range.

Capacity and Practical Headroom

The 8 mm bore moves moderate volumes of water or oil for siphoning, draining or machinery connections. Two metres gives enough reach for bench work or short equipment runs. It runs out on long-distance runs, high-flow pumps or installations needing reinforced walls. It is not for buyers who need longer continuous lengths.

Highlights

  • Handles extreme cold down to -76 °F for reliable outdoor use
  • Withstands high heat up to 428 °F without softening
  • Clear wall lets you see flow and blockages instantly
  • Soft 65 Shore A silicone bends tightly without kinking
  • Two-metre length covers most pump and transfer runs

Specifications

BrandUnique Bargains

Questions about this item

Should I pick the 8mm ID or a different bore for my pump?

This tube has an 8mm inner diameter and 11mm outer diameter with a 1.5mm wall. Match the inner diameter to your pump outlet for a secure fit.

What does the 428°F rating mean when the hose is on a hot engine?

The silicone withstands continuous exposure up to 428°F and stays flexible down to -76°F, so it will not harden or melt near engine heat.

Does the 11mm OD limit which push-fit fittings I can use?

The 11mm outer diameter fits standard 11mm push-to-connect or barbed fittings; the 1.5mm wall keeps the tube from collapsing under vacuum.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.