We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear flexible silicone tubing coil, 0.5mm inner diameter, 1.5mm outer diameter, 16.4ft length

Unique-Bargains

Unique-Bargains Silicone Hose 0.5mm ID 1.5mm OD 16.4ft Clear

SKU CH-3E1S-5PH0E

Clear silicone tubing with 0.5 mm inner diameter and 1.5 mm outer diameter, 16.4 ft length, withstands -76 °F to +428 °F for pump and transfer use

  • Precise fluid control with 0.5mm inner diameter
  • Flexible routing in tight spaces using soft silicone rubber
  • Reliable performance from -76°F to 428°F operating range
  • Ample 16.4ft length for multiple pump transfer projects
  • Non-reactive material suits water, oil and air applications

Silicone Tubing 0.5 mm ID 1.5 mm OD

This clear silicone tubing has a 0.5 mm inner diameter and 1.5 mm outer diameter with a 0.5 mm wall thickness. It is supplied in a 16.4 ft continuous length. The material is nonreactive and rated for an operating range of -76 °F to +428 °F at 65 hardness.

Replaces rigid or opaque lines in low-flow transfer

The flexible rubber construction suits pump, siphoning and draining tasks where tight bends are required. It upgrades installations that need visual flow confirmation or chemical inertness. The jump is worth it when existing tubing kinks, clouds or cannot handle the temperature span.

Handles air, water and oil transfer in tight spaces

The small bore comfortably feeds peristaltic pumps, analytical instruments and machinery interconnects. It runs out when flow rates demand a larger internal diameter or when system pressure exceeds the limits of the 0.5 mm wall.

Highlights

  • Precise fluid control with 0.5mm inner diameter
  • Flexible routing in tight spaces using soft silicone rubber
  • Reliable performance from -76°F to 428°F operating range
  • Ample 16.4ft length for multiple pump transfer projects
  • Non-reactive material suits water, oil and air applications

Specifications

BrandUnique Bargains

Questions about this item

What internal diameter does the 0.5 mm ID tubing need on a fitting to seal properly?

The tubing has a 0.5 mm inner diameter, so barbs or connectors sized for 0.5 mm ID will give a tight friction fit without clamps.

How do I install the 16.4 ft roll without kinking the 0.5 mm wall?

Warm the silicone gently to increase flexibility, then push it onto fittings slowly; the common mistake is forcing cold tubing, which creases the thin 0.5 mm wall.

When should I replace the tubing if it carries fluid near 428 °F?

Inspect regularly for surface cracking or hardening; sustained use at the 428 °F limit accelerates embrittlement, so plan replacement once the material loses its original softness.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.