We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains RJ11 6P4C 2-Way Phone Splitter Adapter White

SKU CH-P8BR-XSESA

Splits one RJ11 jack into two for connecting multiple phones, fax machines or modems

  • FeaturesBeige;Socket Jack;Adapter;Connector;Line Extender
  • Turns one wall jack into two ports so you can connect a phone and a modem together
  • Compact 2.6 x 2 x 2.2 cm body fits behind furniture without blocking adjacent outlets
  • 16 cm lead gives enough slack to reach a desk or nightstand without stretching the cord
  • Weighs only 9 g so it adds no strain to the wall socket or cable run
  • Beige finish matches traditional telephone wiring for a clean, consistent look

Single jack to dual RJ11

This beige RJ11 6P4C splitter turns one telephone socket into two so you can connect a pair of devices such as phones, fax machines, modems or answering machines. It ships new in a compact 2.6 by 2 by 2.2 cm housing with a 16 cm lead. The adapter weighs 9 g and includes a single unit in the package.

Replaces daisy-chain wiring

Instead of running separate cables from the wall you plug this extender into the existing jack and gain a second port instantly. The jump is worth it when you need a fax and a phone on the same line without rewiring the room. It adds no active electronics, so signal quality stays exactly what the line delivers.

Tool-free plug and play

Installation is a matter of pushing the male plug into the wall socket and seating your two cables into the female ports; no screws or configuration are required. What usually goes wrong is a loose fit if the wall jack is worn, which can cause intermittent dial tone or noise on the line.

Highlights

  • Turns one wall jack into two ports so you can connect a phone and a modem together
  • Compact 2.6 x 2 x 2.2 cm body fits behind furniture without blocking adjacent outlets
  • 16 cm lead gives enough slack to reach a desk or nightstand without stretching the cord
  • Weighs only 9 g so it adds no strain to the wall socket or cable run
  • Beige finish matches traditional telephone wiring for a clean, consistent look

Specifications

BrandUnique Bargains
FeaturesBeige;Socket Jack;Adapter;Connector;Line Extender

Questions about this item

How much clearance does the 2.6 cm length and 2.2 cm height need behind the wall jack?

The splitter body measures 2.6 cm long by 2.2 cm high, so allow at least that much depth behind the faceplate for the adapter to sit flat without bending the incoming cable.

Which side of the 16 cm cord plugs into the wall and which side takes the two devices?

The RJ11 male plug on the 16 cm cord goes into the wall jack; the two female 6P4C ports on the adapter body accept your phone, fax or modem cords.

When should the beige RJ11 6P4C splitter be replaced?

Replace it if the plastic housing cracks, the male plug pins bend, or the female ports become loose enough that connected cords fall out or cause static on the line.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.