We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black right-angle RJ11 modular jacks on PCB mounts

Unique-Bargains

Unique-Bargains Right Angle PCB 6P6C RJ11 Socket 5 Pieces

SKU CH-8P1E-KZ40J

Five right-angle 6P6C RJ11 PCB sockets for standard telephone cable connections

  • Featurestelephone connector;telephone connector;RJ11 jack;90 degree;
  • Right-angle 90-degree PCB mount saves board space
  • 6P6C RJ11 jack accepts standard telephone cables
  • Five connectors per pack support multiple installations
  • Compact 1.8 x 1.3 x 1.2 cm footprint fits tight layouts
  • Black plastic housing with six round pins ensures reliable contact

Right-Angle RJ11 PCB Socket

This pack contains five 6P6C modular jacks designed for printed-circuit-board mounting. The right-angle orientation lets the telephone cable exit parallel to the board surface, saving space inside enclosures. Each connector accepts standard six-position six-contact cables without shielding. They suit hobbyists, repair technicians and small-volume assemblers working on landline or modem interfaces.

Thermals Noise and Power Draw

Passive components generate no heat and draw no power during normal operation. The plastic housing and metal contacts remain at ambient temperature while carrying typical telephone-line signals. No fan, heatsink or active cooling is required, so the parts add zero acoustic noise to the system. Reliability depends only on solder-joint quality and cable strain relief.

Upgrade and Replacement Context

These sockets replace damaged or missing RJ11 jacks on legacy telephony boards, fax cards or dial-up modem modules. The 90-degree footprint matches many existing PCB layouts, so rework often needs no new board revision. The jump is worthwhile when a through-hole jack has lifted pads or when a straight connector fouls a case wall. Buyers needing shielded variants or surface-mount footprints must look elsewhere.

Highlights

  • Right-angle 90-degree PCB mount saves board space
  • 6P6C RJ11 jack accepts standard telephone cables
  • Five connectors per pack support multiple installations
  • Compact 1.8 x 1.3 x 1.2 cm footprint fits tight layouts
  • Black plastic housing with six round pins ensures reliable contact

Specifications

BrandUnique Bargains
Featurestelephone connector;telephone connector;RJ11 jack;90 degree;replacement parts

Questions about this item

How do I solder the 90-degree RJ11 socket onto a PCB, and which pin alignment step is often missed?

Insert the six round pins through the board holes matching the 1.8 cm by 1.3 cm footprint, then solder each pin; the step often missed is confirming the 90-degree orientation so the jack faces the panel edge before soldering.

Will the plastic housing or the gold-plated contacts need replacement after repeated cable insertions?

The plastic housing and contacts are rated for typical telephone use; if the spring tension drops or the housing cracks after many cycles, replace the whole socket — individual contacts are not serviceable.

What is the first mechanical limit reached when the connector is used continuously in a tight enclosure?

The 1.2 cm height leaves minimal clearance above the PCB; sustained side loads on the cable can stress the solder joints before the jack body itself fails.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.