We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 30 cm RGB splitter cables, each with one 3-pin female plug branching to two female plugs

Unique-Bargains

Unique-Bargains RGB Splitter Cable 1 Female to 2 Female 3 Pin 30cm 2Pcs

SKU CH-1C68-BZ48J

Connects up to two 5050 or 3528 RGB LED strips or fans to a single 3-pin 5V source using two 30cm splitter cables

  • TypeHI - Electrical & Industrial Wire
  • Connects two RGB strips or fans to one header
  • 3-pin 5 V design fits 5050 and 3528 LED strips
  • 30 cm length gives flexible placement options
  • Simple plug-and-play installation with no tools needed
  • Pack includes two identical splitter cables

Splitter for RGB LED strips

This Unique-Bargains cable splits one 3-pin 5V source into two female connectors. It is built for 5050 and 3528 RGB LED strips or compatible RGB fans. The 30 cm length suits internal case routing or short strip-to-controller runs. Two cables are included in the pack.

Behaviour under sustained load

The passive wiring carries the 5V signal to both outputs without active components. Voltage drop over the 30 cm run is minimal for typical LED current draw. Both branches receive the same control signal simultaneously. No amplification or signal regeneration occurs.

Thermals noise and power

The cable generates no heat and produces no audible noise during operation. Power draw is limited to the attached LED strips or fans. The 5V rating must be observed; connecting a 5V strip to a 12V source will cause damage. Insulation remains flexible at normal indoor temperatures.

Highlights

  • Connects two RGB strips or fans to one header
  • 3-pin 5 V design fits 5050 and 3528 LED strips
  • 30 cm length gives flexible placement options
  • Simple plug-and-play installation with no tools needed
  • Pack includes two identical splitter cables

Specifications

BrandUnique Bargains
TypeHI - Electrical & Industrial Wire

Questions about this item

Does the 30 cm cable length add noticeable resistance or heat when two 5050 LED strips run all day?

The 30 cm length keeps resistance low; the cable itself stays cool while carrying the combined current of two strips.

What must I already own to use these 3-pin 5 V splitters with 3528 strips?

You need a 5 V 3-pin RGB controller or motherboard header and the LED strips themselves.

Will the 3-pin connectors fit the older 4-pin 12 V RGB headers on my existing controller?

No, the 3-pin 5 V design is not compatible with 4-pin 12 V headers; mixing them can damage the strips.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.