We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short 8 inch RG58 coaxial cable with nickel BNC male connectors and gold contacts

Unique-Bargains

Unique-Bargains RG58 BNC Male to BNC Male Coaxial Cable 50 Ohm 8 Inch

SKU CH-DE9Q-ZCA46

An 8-inch RG58 coaxial cable with BNC male connectors on both ends, rated at 50 ohms impedance and 95% braid coverage

  • TypeHI - Antennas, Wires & Fittings
  • 8-inch RG58 cable keeps RF runs short and tidy
  • 50-ohm impedance matches standard test and radio gear
  • 95% braid coverage shields signals from outside noise
  • Nickel-plated bodies with gold-plated brass contacts resist corrosion
  • Ready-to-use BNC male-to-male assembly needs no extra termination

RG58 BNC cable, 8 inch

This is a ready-made RG58/U coaxial cable terminated with BNC male connectors at both ends. It presents a 50 ohm impedance and uses a nickel-plated connector body with gold-plated brass contacts for reliable RF signal transfer. The 95% braid coverage provides effective shielding for low-loss performance. The cable measures 8 inch in length and 0.2 inch in diameter.

Suited for short RF links, not long runs

The 8 inch length fits tight interconnections between instruments, antennas or test gear on a bench or in a vehicle. It will not reach between separate racks or distant mounting points, so installers needing longer spans should select a different length. The fixed BNC ends cannot be re-terminated in the field without tools. Users requiring N-type or SMA interfaces must use adapters.

Drops into any 50 ohm BNC chain

Connect it directly between BNC ports on radios, analysers, antennas or surge protectors without extra pigtails. The gold-plated contacts resist oxidation for stable repeated mating cycles. The flexible RG58/U jacket routes easily around corners inside enclosures. No power supply, driver or configuration is required — just plug both ends into matching 50 ohm BNC sockets.

Highlights

  • 8-inch RG58 cable keeps RF runs short and tidy
  • 50-ohm impedance matches standard test and radio gear
  • 95% braid coverage shields signals from outside noise
  • Nickel-plated bodies with gold-plated brass contacts resist corrosion
  • Ready-to-use BNC male-to-male assembly needs no extra termination

Specifications

BrandUnique Bargains
TypeHI - Antennas, Wires & Fittings

Questions about this item

What equipment needs a BNC female port to connect this 8‑inch RG58 cable?

Any RF device or test instrument with a BNC female jack — oscilloscopes, signal generators, antenna analysers or ham‑radio gear — will accept the male plugs on both ends.

Will the 50‑ohm impedance match older RG58/U patch leads already in my rack?

Yes. The cable is rated 50 ohm with 95 % braid coverage, the same nominal impedance as standard RG58/U, so it can be mixed with existing 50‑ohm BNC runs without creating a mismatch.

How can I confirm the link is working after I plug it in?

Check for a firm click when each BNC male connector locks into its female counterpart, then verify signal continuity with a multimeter or observe a clean waveform on the connected instrument.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.