We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two brass push-fit fittings with blue plastic collars, PT1/8 thread, 19.5mm tall

Unique-Bargains

Unique-Bargains PT1/8 Push-Fit Tube Fitting 6mm OD 3mm Filament Brass 2pcs

SKU CH-E8M5-1E4DR

Connects 6 mm OD PTFE tube for 3 mm filament with a PT1/8 thread push-to-fit brass and plastic fitting

  • Push-fit design connects 6 mm PTFE tube instantly
  • Brass-and-plastic body fits PT 1/8 threads securely
  • Two fittings included for extruder-to-tube links
  • 8 mm brass-end bore accepts 3 mm filament path
  • 5 mm overall height suits compact hot-ends

6mm OD Push-Fit Fitting PT1/8 Thread

These brass-and-plastic fittings accept 6 mm OD tubing for 3 mm filament and use a PT1/8 thread. They connect an extruder to a PTFE tube in a 3D printer. The pack contains two pieces.

Who they suit and who they do not

Builders who need a quick-connect joint for 6 mm OD Bowden tubing with a PT1/8 port can use these. Users whose printer requires a different thread size or a different tube diameter cannot use them.

Deciding specification

The thread is PT1/8 and the inner diameter at the brass end measures 6.8 mm. If the printer’s hot-end or extruder uses another thread standard, the fitting will not install.

Highlights

  • Push-fit design connects 6 mm PTFE tube instantly
  • Brass-and-plastic body fits PT 1/8 threads securely
  • Two fittings included for extruder-to-tube links
  • 8 mm brass-end bore accepts 3 mm filament path
  • 5 mm overall height suits compact hot-ends

Specifications

BrandUnique Bargains

Questions about this item

Will the PT1/8 thread on these fittings match the extruder port on my older 3D printer?

The fittings use a PT1/8 thread size, so they will match any extruder or hot-end with the same thread specification.

How can I confirm the push-to-fit mechanism is gripping the PTFE tube correctly after installation?

Push the 6 mm OD tube into the blue end until it seats firmly; a gentle tug should not release the tube unless the blue release collar is pressed down.

The pack lists two fittings — are any lock nuts, sealing washers or extra PTFE tube included?

The package contains only the two brass-and-plastic push-to-fit fittings; lock nuts, washers and PTFE tubing must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.