We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two clear PETG hard tubes, 12mm ID, 16mm OD, 500mm long

Unique-Bargains

Unique-Bargains PETG Hard Tubing 12mm ID 16mm OD 500mm Clear 2pcs

SKU CH-WXCQ-4Z33N

Clear PETG hard tubing for PC water-cooling, 12 mm inner diameter, 16 mm outer diameter, 500 mm length, two pieces

  • High transparency PETG for clear coolant visibility
  • 12 mm inner diameter fits standard 12/16 fittings
  • 16 mm outer diameter matches common compression sizes
  • 500 mm length per tube allows flexible routing
  • 124 g total weight keeps loop light

Clear PETG tubing for water-cooling loops

Two rigid PETG tubes with 12 mm inner and 16 mm outer diameter arrive ready for custom liquid-cooling builds. Each piece measures 500 mm and weighs 124 g total. The high-transparency material shows coolant colour clearly and is rated for indoor or outdoor loop configurations.

Suited to builders who want rigid tubing without

The PETG construction resists cracking better than acrylic when bent with heat, and the tubes cut cleanly with a fine-toothed saw. Installers who prefer soft tubing or need pre-bent angles will not find those options here.

12 mm ID and 16 mm OD define every fitting choice

Only compression or push-fit fittings made for these exact dimensions will seal correctly. The 500 mm length per tube sets the maximum straight run before a joint is required.

Highlights

  • High transparency PETG for clear coolant visibility
  • 12 mm inner diameter fits standard 12/16 fittings
  • 16 mm outer diameter matches common compression sizes
  • 500 mm length per tube allows flexible routing
  • 124 g total weight keeps loop light

Specifications

BrandUnique Bargains

Questions about this item

Will the 12 mm inner diameter and 16 mm outer diameter match my existing PETG fittings?

The tubing is made to 12 mm inner and 16 mm outer dimensions, the standard size used by most hard-tube water-cooling fittings.

How can I verify the 500 mm clear tubes are flowing correctly once installed?

Fill the loop and inspect the high-transparency walls — any bubbles, cloudiness or leaks will be immediately visible through the clear PETG.

The package lists 2 tubes at 124 g total — do I need to buy cutting or finishing tools separately?

Yes, a fine-toothed hacksaw and a deburring tool for primary grinding of the cut ends are not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.