We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four blue PETG hard tubes, 14mm OD, 10mm ID, 500mm length

Unique-Bargains

Unique-Bargains PETG Hard Tubing 10mm ID 14mm OD 0.5m Blue 4pcs

SKU CH-1KNJ-1W1Y0

Four blue PETG hard tubes, each 500 mm long with 10 mm inner and 14 mm outer diameter, designed for PC water-cooling loops

  • Durable PETG resists cracking better than acrylic
  • 10 mm inner and 14 mm outer diameter for standard fittings
  • 500 mm length per tube suits compact or large loops
  • Blue colour without fluorescent additives for clean aesthetics
  • Four tubes weighing 202 g total ready to cut and install

PETG Hard Tubing for Water Cooling

Unique-Bargains PETG hard tubes provide 10 mm inner and 14 mm outer diameters in 500 mm lengths. The blue tubing contains no fluorescent additive and suits indoor or outdoor custom loops. Four pieces weigh 202 g total and are ready for cutting to fit your build.

Thermals and Noise Characteristics

PETG material handles typical loop temperatures without softening or discolouration. The rigid tube walls transmit no pump vibration, keeping acoustic output dependent only on other components. Smooth inner bores reduce flow restriction and help maintain efficient coolant movement.

Sustained Load Behaviour

Under continuous circulation the tubing retains dimensional stability and resists kinking when bent with proper tools. Cut ends require deburring before assembly to prevent leaks during long-term operation. The material is recyclable and can be reused if the loop is reconfigured.

Highlights

  • Durable PETG resists cracking better than acrylic
  • 10 mm inner and 14 mm outer diameter for standard fittings
  • 500 mm length per tube suits compact or large loops
  • Blue colour without fluorescent additives for clean aesthetics
  • Four tubes weighing 202 g total ready to cut and install

Specifications

BrandUnique Bargains

Questions about this item

How do I install the 14 mm OD PETG tubes and what step is often missed?

Cut each 500 mm tube to length with a fine-toothed hacksaw, then chamfer and deburr both ends until the cut feels smooth before pushing them into 14 mm compression fittings.

What maintenance or replacement will the blue PETG tubes need later?

Inspect the 10 mm ID bore periodically for clouding or plasticiser build-up; replace any tube that shows permanent bending, surface crazing or loss of transparency.

What limit appears first during sustained loop operation?

The 202 g PETG set will reach its glass-transition temperature before acrylic would, so prolonged coolant heat above that point softens the 14 mm OD walls and risks permanent deformation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.