Unique-Bargains
Unique-Bargains PA12 Nylon Tube 4mm ID 6mm OD 2m Blue
PA12 nylon tube with 4 mm ID and 6 mm OD for hydraulic brake, fuel and compressed-air lines
- Excellent flexibility with small bending radius for tight routing
- Wide operating temperature range from -40 to 120 °C
- Low permeability and high electrical resistance suit insulator duties
- 4 mm ID by 6 mm OD with 1 mm wall thickness
- 2 metre PA12 nylon length in blue colour
PA12 Nylon Tube for Hydraulic Systems
This blue PA12 nylon tube measures 2 metres in length with a 4 mm inside diameter and a 6 mm outside diameter. It is built for hydraulic brake lines, power steering circuits and general fluid transfer on light trucks, passenger cars, forklifts and marine equipment. The tubing handles compressed air, fuel oil, chemical solvents and other liquids across a wide temperature range.
Suits Mechanics and Industrial Maintenance
Technicians who need a flexible, small-bore line for hydraulic transmission and control systems will find the material’s low permeability and high electrical resistance useful. It is not intended for anyone requiring larger diameters, longer continuous lengths, or fittings and clamps which are not included in the package.
Capacity and Pressure Headroom
The 1 mm wall thickness gives a .03-inch tube wall that resists shock and maintains constant hardness for long service life. Operating temperatures from -40 to 120 cover most automotive and industrial environments, while the small bending radius allows tight routing. The tube reaches its limit when system pressure exceeds the material’s rating or when a bigger bore is needed for higher flow.
Highlights
- Excellent flexibility with small bending radius for tight routing
- Wide operating temperature range from -40 to 120 °C
- Low permeability and high electrical resistance suit insulator duties
- 4 mm ID by 6 mm OD with 1 mm wall thickness
- 2 metre PA12 nylon length in blue colour
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
What fittings do I need to connect this 4 mm ID nylon tube?
Use push-to-connect or compression fittings sized for 4 mm inside diameter and 6 mm outside diameter; the 1 mm wall thickness matches standard 4/6 metric tubing specs.
Will this PA12 tube handle the pressure in my existing hydraulic brake system?
PA12 nylon is widely used for hydraulic brake and power-steering lines on light trucks, cars, forklifts and cranes, offering excellent flexibility, small bending radius and good shock resistance.
How can I verify the tube is performing correctly after installation?
Pressurise the system and check for leaks at every fitting; the blue tube should stay firm with minimal pressure loss and show no kinks when bent to its small bending radius.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
