We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Translucent nylon PA6 tubing coil, 6mm inner diameter, 8mm outer diameter, 6.56ft length

Unique-Bargains

Unique-Bargains Nylon PA6 Tubing 6mm ID x 8mm OD 6.56ft Translucent

SKU CH-31DC-45Z2Y

Translucent Nylon PA6 tubing, 6 mm inner by 8 mm outer diameter, supplied in a 6.56 ft length for air, water, fuel or chemical transfer from -40 to 105 °C

  • Low moisture absorption keeps tubing flexible for longer service life
  • Semi-rigid walls allow higher flow rates and working pressure
  • Compatible with push-to-connect and compression fittings for simple installation
  • Operates from -40 °C to 105 °C for diverse fluid transfer
  • Tensile strength above 60.0 MPa ensures durable performance

Product Identity

Unique-Bargains Nylon PA6 tubing with a 6 mm inner diameter and 8 mm outer diameter, supplied in a 6.56 ft translucent coil. The semi-rigid hose is designed for pneumatic circuits, fluid transfer and air-brake lines where low moisture absorption and long service life are required.

Installation Checks

Verify that your push-to-connect or compression fittings accept a 6 mm ID by 8 mm OD tube before ordering. Confirm the operating medium and system pressure stay within the tubing's working limits and that the installation temperature will remain between -40 and 105 Celsius degree.

Build & Daily Use

The PA6 material delivers tensile strength above 60.0 MPa, bending strength of 90.0 MPa and notched impact strength above 5 KJ/m2 while staying lightweight at 1.14-1.15 g/cm3. Its low moisture uptake keeps the tube flexible over time, and the translucent wall lets you inspect flow visually during routine checks.

Highlights

  • Low moisture absorption keeps tubing flexible for longer service life
  • Semi-rigid walls allow higher flow rates and working pressure
  • Compatible with push-to-connect and compression fittings for simple installation
  • Operates from -40 °C to 105 °C for diverse fluid transfer
  • Tensile strength above 60.0 MPa ensures durable performance

Specifications

BrandUnique Bargains

Questions about this item

Does the package include fittings or only the tubing?

The package contains one length of Nylon PA6 tubing measuring 6.56 ft with 6 mm inner and 8 mm outer diameter. Push-to-connect or compression fittings must be purchased separately.

How do I decide between the listed temperature ranges?

The material withstands -40 to 105 °C continuously; the -40 to +60 °C figure applies when conveying compressed air, water, fuel oil, chemical solvents or liquid food. Choose based on the fluid and peak temperature your system will see.

What does the 60.0 MPa tensile strength mean once the tube is installed?

A tensile strength above 60.0 MPa indicates the tube wall resists pulling forces well, supporting the higher working pressures that the thinner PA6 wall allows while staying flexible down to -40 °C.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.