We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear nylon PA6 tubing coil 2mm inner 4mm outer diameter 6.56ft length

Unique-Bargains

Unique-Bargains Nylon PA6 Tubing 2mm x 4mm 6.56ft Clear

SKU CH-HPBM-3HDWF

Clear Nylon PA6 tubing, 2 mm inner by 4 mm outer diameter, 6.56 ft long, operates from −40 °C to 105 °C with tensile strength above 60.0 MPa

  • Low moisture absorption keeps the tubing flexible for longer service life
  • Nylon PA6 material provides high tensile strength above 60.0 MPa
  • Operating range from -40 to 105 Celsius Degree suits diverse fluids
  • Compatible with push-to-connect and compression fittings for simple installation
  • Semi-rigid wall enables higher flow rates and working pressure

Product Identity

Unique-Bargains Nylon PA6 tubing has a 2 mm inner diameter and 4 mm outer diameter, supplied in a clear 6.56 ft length. It is intended for fluid or air transfer in automotive, pneumatic and light-industrial systems. The semi-rigid wall works with standard push-to-connect and compression fittings for straightforward installation.

Upgrade Considerations

The tubing replaces older nylon lines that absorb moisture and become brittle, reducing service life. PA6 material maintains flexibility because its moisture absorption rate is very low, and elongation exceeds 30 percent. A switch is worthwhile when operating temperatures span -40 to 105 Celsius or when tensile strength above 60.0 MPa and bending strength of 90.0 MPa are required.

Suitability

This tube suits builders needing a clear, lightweight line for compressed air, water, fuel oil, chemical solvents or liquid food within the stated temperature range. It is not for buyers who need a larger bore, a different wall thickness, or a material rated beyond 105 Celsius or above 225 Celsius melting point.

Highlights

  • Low moisture absorption keeps the tubing flexible for longer service life
  • Nylon PA6 material provides high tensile strength above 60.0 MPa
  • Operating range from -40 to 105 Celsius Degree suits diverse fluids
  • Compatible with push-to-connect and compression fittings for simple installation
  • Semi-rigid wall enables higher flow rates and working pressure

Specifications

BrandUnique Bargains

Questions about this item

What push-to-connect or compression fitting sizes accept the 2 mm inner and 4 mm outer diameter tubing?

Standard push-to-connect and compression fittings sized for 4 mm outer diameter and 2 mm inner diameter will accept this tubing directly.

How do I cut and insert the 6.56 ft clear PA6 tubing without creating leaks at the fittings?

Cut the tube square with a sharp tube cutter, deburr the end, then push it fully into the fitting until it seats against the internal stop; the semi-rigid wall resists kinking during insertion.

When should I replace the tubing given its operating range of -40 to 105 °C and low moisture absorption?

Inspect regularly for surface crazing, hardening or discolouration; replace if the tube becomes brittle, shows cracks near fittings, or no longer seals reliably at the rated temperature extremes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.