We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear nylon PA6 tubing coil 2mm bore 4mm OD 3.28ft length

Unique-Bargains

Unique-Bargains Nylon PA6 Tubing 2mm ID x 4mm OD 3.28ft Transparent

SKU CH-YXD6-QJMHM

Transparent Nylon PA6 tubing with 2 mm inner and 4 mm outer diameter, 3.28 ft length, operating from -40 to 105 °C for air, water, fuel or chemical lines

  • Low moisture absorption keeps tubing flexible longer
  • Withstands temperatures from -40 to 105 Celsius
  • High tensile strength above 60.0 MPa resists pressure
  • Semi-rigid walls allow higher flow rates
  • Compatible with push-to-connect and compression fittings

Transparent Nylon PA6 tubing for fluid transfer

This 3.28ft length of Nylon PA6 tubing has a 2mm inner diameter and 4mm outer diameter. The material offers high tensile strength above 60.0 MPa and bending strength of 90.0 MPa. Low moisture absorption keeps the tube flexible across an operating range of -40 to 105 Celsius Degree. It suits compressed air, water, fuel oil and chemical solvent lines.

Sustained temperature and chemical resistance

The tubing withstands continuous exposure up to 105 Celsius Degree without softening, with a melting point between 215 and 225 Celsius Degree. Elongation exceeds 30% and notched impact strength is above 5 KJ/m2, so the hose resists cracking under vibration or pressure cycling. Density of 1.14 to 1.15 g/cm3 contributes to lightweight routing in tight spaces.

Replaces rubber or lower-grade nylon lines

Use this when existing hoses harden, crack or absorb moisture in fuel delivery, vacuum, irrigation or air conditioning systems. The semi-rigid wall allows higher flow rates than thicker-walled alternatives and works with push-to-connect or compression fittings. It is not suited for applications requiring continuous service above 105 Celsius Degree or diameters other than 2mm ID.

Highlights

  • Low moisture absorption keeps tubing flexible longer
  • Withstands temperatures from -40 to 105 Celsius
  • High tensile strength above 60.0 MPa resists pressure
  • Semi-rigid walls allow higher flow rates
  • Compatible with push-to-connect and compression fittings

Specifications

BrandUnique Bargains

Questions about this item

Will the tubing soften or deform if it runs near components that reach 105 °C all day?

The operating range tops out at 105 °C and the melting point is 215–225 °C, so continuous exposure at 105 °C stays well below the softening threshold.

Which fittings do I need on hand to connect the 2 mm ID × 4 mm OD tube?

Standard push-to-connect and compression fittings sized for 4 mm outside diameter will seal this tubing without special tools.

Can I keep my existing brass compression fittings when I switch to this PA6 line?

Yes — the semi-rigid PA6 wall works with ordinary brass compression fittings and push-to-connect bodies made for 4 mm OD tubing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.