We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Translucent nylon PA6 tube, 12mm ID x 14mm OD, 3.28ft coil

Unique-Bargains

Unique-Bargains Nylon PA6 Hose 12mm ID x 14mm OD 3.28ft Translucent

SKU CH-1X3J-FEMGH

Translucent Nylon PA6 tubing, 12mm ID by 14mm OD and 3.28ft long, handles -40 to 105 °C for air, water, fuel or chemical lines

  • Low moisture absorption keeps tubing flexible longer
  • Nylon PA6 provides high tensile strength above 60.0 MPa
  • Operating range from -40 to 105 °C suits harsh environments
  • Compatible with push-to-connect and compression fittings
  • 28 ft length with 12 mm ID and 14 mm OD

Translucent Nylon PA6 tubing for fluid systems

This 3.28ft length of nylon PA6 tubing has a 12mm inner diameter and 14mm outer diameter for air, water, fuel or chemical transfer. The translucent wall lets you inspect flow visually while the material handles -40 to 105 Celsius Degree operating temperatures. It suits pneumatic, hydraulic and food-grade lines where low moisture absorption matters.

Push-to-connect and compression fitting compatible

Standard push-to-connect and compression fittings join this semi-rigid tube without special tools. Cut square with a sharp blade to avoid leaks; a ragged end is the most common cause of seal failure. The thin wall gives higher flow rates but needs a clean, perpendicular cut for the collet to grip evenly.

Operating range -40 to 105 Celsius Degree

The continuous service window of -40 to 105 Celsius Degree is the single figure that decides fitment for your application. Above 105 Celsius Degree the material softens toward its 215-225 Celsius Degree melting point and may creep under pressure. Below -40 Celsius Degree it loses the flexibility that PA6 retains by resisting moisture uptake.

Highlights

  • Low moisture absorption keeps tubing flexible longer
  • Nylon PA6 provides high tensile strength above 60.0 MPa
  • Operating range from -40 to 105 °C suits harsh environments
  • Compatible with push-to-connect and compression fittings
  • 28 ft length with 12 mm ID and 14 mm OD

Specifications

BrandUnique Bargains

Questions about this item

How can I confirm the 12mm ID x 14mm OD nylon tubing is flowing correctly after installation?

Pressurise the line and verify fluid or air moves without restriction; the translucent wall lets you see bubbles or blockages instantly.

What comes in the package and which fittings must I source separately?

The box contains one 3.28ft length of Nylon PA6 tubing; push-to-connect or compression fittings for 12mm ID are not included.

Should I choose this 12mm ID x 14mm OD size or a different diameter for my compressed-air system?

Select this size when your fittings and flow calculations call for a 12mm inner diameter; the 14mm outer diameter works with standard 12mm push-to-connect bodies.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.