We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains NBR Fuel Line Hose 5mm ID x 10mm OD 2M Black

SKU CH-J43G-MMVH9

NBR fuel line hose transports diesel, petrol, lubricating oil and other mineral oils at -20 to 80 °C

  • NBR construction resists oil, wear, ageing and ozone
  • Operates from -20 to 80 °C for wide climate use
  • 2 m length gives 6.56 ft of flexible routing
  • 5 mm ID with 10 mm OD fits standard fittings
  • Lightweight and soft for easy bending in tight spaces

Fuel Line Hose NBR 5 mm ID 10 mm OD

This black NBR fuel line hose has an inner diameter of 5 mm and an outer diameter of 10 mm with a wall thickness of 2.5 mm. It comes in a 2 m length, which is about 6.56 ft. The material is oil resistant, wear resistant and ozone resistant, and it stays flexible from -20 °C to 80 °C.

Operating temperature range -20 °C to 80 °C

The hose is rated for continuous use between -20 °C and 80 °C, or -4 °F to 140 °F. This range decides whether the tubing will survive the heat of an engine bay or the cold of winter storage without hardening or softening. Outside those limits the material can degrade and leak.

Suits diesel petrol and oil transfer in automotive

It is built for moving diesel, petrol, lubricating oil and similar mineral oils in cars, boats, machinery and general workshop plumbing. Buyers who need a hose rated for brake fluid, coolant under pressure, potable water or high-pressure hydraulic circuits should look at a different specification.

Highlights

  • NBR construction resists oil, wear, ageing and ozone
  • Operates from -20 to 80 °C for wide climate use
  • 2 m length gives 6.56 ft of flexible routing
  • 5 mm ID with 10 mm OD fits standard fittings
  • Lightweight and soft for easy bending in tight spaces

Specifications

BrandUnique Bargains

Questions about this item

Will the 5 mm inside diameter carry enough fuel for a typical carburetted engine?

The 5 mm bore is sized for small-displacement petrol or diesel lines; flow capacity matches the hose cross-section and the pump pressure in your system.

What does the NBR material rating of -20 to 80 °C mean for year-round use?

NBR stays flexible at -20 °C and resists softening up to 80 °C, covering normal under-bonnet temperatures in both winter and summer.

How much clearance do I need for the 10 mm outside diameter and 2.5 mm wall when routing the 2 m length?

The hose occupies a 10 mm circle with a 2.5 mm wall; allow that radius plus a gentle bend radius so the 2 m coil routes without kinking.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.