We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver-grey DC gear motor with 6mm output shaft

Unique-Bargains

Unique-Bargains JSX5300-370 DC 12V 0.6RPM 6mm Shaft Machinery Motor

SKU CH-2ABA-XZF2S MPN JSX5300-370

A DC 12 V worm-gear motor delivering 0.6 RPM with a self-locking output shaft and 6 mm diameter

  • DC 12 V supply suits low-voltage automation builds
  • 6 RPM output delivers high torque for precise positioning
  • 6 mm shaft diameter fits standard couplings and gears
  • Self-locking worm gear holds position when power is removed
  • Rectangular gearbox footprint simplifies mounting in tight spaces

Miniature worm-gear DC motor

The Unique-Bargains JSX5300-370 is a compact DC 12V gear motor rated at 0.6RPM. It suits hobbyists and engineers building slow-speed automation, positioning fixtures or experimental drives where a self-locking output is required. The rectangular gearbox layout allows mounting in tight, non-standard envelopes.

Low-speed torque with self-lock hold

At 0.6RPM the motor delivers high reduction torque suitable for light-duty lifting, valve actuation or slow conveyor indexing. The worm gear prevents back-driving so the output shaft stays fixed when power is removed, eliminating the need for a separate brake in many designs. Continuous stall loads beyond the gearbox rating will overheat the windings.

Quiet operation at modest current

The small 6 x 14mm shaft and 2.5mm female thread keep rotating mass low, so audible gear whine is minimal in normal indoor use. Current draw remains modest at 12V, allowing simple bench supplies or battery packs to drive the unit without extra cooling. Extended duty cycles in dusty environments may require periodic lubrication checks.

Highlights

  • DC 12 V supply suits low-voltage automation builds
  • 6 RPM output delivers high torque for precise positioning
  • 6 mm shaft diameter fits standard couplings and gears
  • Self-locking worm gear holds position when power is removed
  • Rectangular gearbox footprint simplifies mounting in tight spaces

Specifications

BrandUnique Bargains

Questions about this item

Will the 6 mm shaft on this JSX5300-370 motor fit the coupling I already use on my 12 V projects?

The output shaft measures 6 x 14 mm, so any coupling or hub bored for a 6 mm shaft will mate directly.

How can I confirm the self-locking function is active after I wire the motor?

Power the unit at 12 V, then cut the supply; the output shaft should resist turning by hand because the worm gear locks when de-energised.

Does the package include mounting bolts or a wiring harness, or must I source them separately?

The box contains only the DC gear motor itself; fasteners, connectors and any drive accessories are not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.