Unique-Bargains
Unique-Bargains IEC C13 PCB Mount Connector 2 Pcs
Pack of two IEC C13 PCB-mount female power sockets with 3.3 mm mounting holes, 40 mm hole spacing and three terminals
- Two-piece pack covers spare or dual-socket needs
- IEC C13 female socket accepts standard mains leads
- 3 mm mounting holes fit common PCB layouts
- 40 mm hole spacing matches typical board footprints
- Plastic-and-metal shell weighs just 24 g
IEC C13 PCB Mount Power Socket
This pack contains two female IEC C13 connectors designed for direct PCB mounting. Each unit uses a plastic and metal construction with three terminals and a silver tone and black finish. The connectors weigh 24g in total and are intended to replace a damaged power input jack on a circuit board.
Suits Repair and Prototyping Work
Hobbyists and technicians replacing a failed mains inlet on existing hardware will find the 3.3mm mounting holes and 40mm hole spacing match many common layouts. Builders who need a different mounting style, a different terminal count, or a higher current rating should look at alternative connector types.
3.3mm Mounting Hole Diameter Decides Fit
The installing hole diameter of 3.3mm (0.13in) and the 40mm (1.57in) hole distance are the critical dimensions that determine whether this part aligns with the existing PCB footprint. Verify these measurements against the board before ordering.
Highlights
- Two-piece pack covers spare or dual-socket needs
- IEC C13 female socket accepts standard mains leads
- 3 mm mounting holes fit common PCB layouts
- 40 mm hole spacing matches typical board footprints
- Plastic-and-metal shell weighs just 24 g
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
Will the 40 mm mounting-hole spacing match the legacy PCB I plan to keep?
The connector uses a 40 mm hole distance with 3.3 mm diameter holes, so it fits boards drilled to that pattern.
How can I confirm the 3-terminal socket is seated correctly after soldering?
Check that the plastic body sits flush on the board, the three terminals are fully soldered, and a standard IEC C13 plug inserts and locks without resistance.
The pack lists two female IEC C13 connectors — are mounting screws or solder included?
Only the two connectors are supplied; mounting hardware and solder must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
