We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat grey ribbon cable with two 30-pin female FC connectors, 20cm long

Unique-Bargains

Unique-Bargains IDC Flat Ribbon Cable FC/FC Female 30Pin 1.27mm 20cm

SKU CH-WHEX-FKFPX

30-pin flat ribbon cable with 1.27mm pitch FC/FC female connectors for compact board-to-board links

  • TypeCable Connectors
  • 30-pin FC/FC female connectors link boards directly
  • 27 mm pitch matches standard IDC spacing
  • 20 cm length fits tight chassis routing
  • 19 mm flat ribbon separates for clean terminations
  • Suits AVR JTAG debuggers and ISP programmers

30-pin FC/FC ribbon cable

This 30-pin flat ribbon cable uses FC-to-FC female connectors on a 1.27 mm pitch. The 20 cm length and 19 mm width suit internal board-to-board links in tight enclosures. It arrives new and ready for direct installation.

Engineers and hobbyists needing a short IDC link

Designers who require a compact 30-way IDC connection for debug headers, programmer interfaces or panel wiring will find the pitch and connector style match common AVR JTAG and ISP layouts. Builders needing a different pin count, a male connector variant or a longer cable run should select an alternative part.

1.27 mm pitch with 30 FC/FC positions

The cable provides exactly thirty conductors on a 1.27 mm centre-to-centre spacing with female FC contacts at both ends. This single specification determines whether the cable mates with the target header or programmer socket.

Highlights

  • 30-pin FC/FC female connectors link boards directly
  • 27 mm pitch matches standard IDC spacing
  • 20 cm length fits tight chassis routing
  • 19 mm flat ribbon separates for clean terminations
  • Suits AVR JTAG debuggers and ISP programmers

Specifications

BrandUnique Bargains
TypeCable Connectors

Questions about this item

How do I confirm the 30-pin IDC ribbon cable is seated correctly after connecting it to my debugger?

Verify each of the 30 conductors aligns with the 1.27 mm pitch on both FC female ends and that the 19 mm wide ribbon lies flat without twists; a continuity check on all pins confirms the 20 cm link is intact.

What comes in the package and is anything else required to use the cable?

The box contains one 30-pin flat ribbon cable with FC female connectors on both ends; no extra adapters or tools are included, so have a compatible 1.27 mm pitch header or socket ready for termination.

Which version should I choose for a standard AVR JTAG debugger that needs a 30-pin 1.27 mm pitch connection?

Select this A-type FC-to-FC female cable; its 30 pins, 1.27 mm pitch, 20 cm length and 19 mm width match the typical JTAG/ISP header used on Atmel AVR debuggers and programmers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.