We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five silver zinc-coated steel gas spring end fittings with M8 female threads and 8mm holes

Unique-Bargains

Unique-Bargains Gas Spring End Fitting M8 Female 8mm Hole A3 Steel Zinc Coated Silver Tone 5Pcs

SKU CH-JGMV-SF3ES

Pack of five M8 female-threaded gas-spring end fittings with 8 mm ball holes, A3 steel zinc-coated for corrosion resistance

  • A3 steel with zinc coating resists corrosion
  • M8 female thread fits standard gas spring studs
  • 8 mm hole accepts matching ball-end components
  • Five fittings supplied for complete installations
  • 110 g total weight keeps assemblies light

M8 Female Gas Spring End Fitting

This pack contains five M8 female end fittings with an 8 mm hole for gas spring struts. They are made from A3 steel with a zinc coating and a silver tone finish. The fittings serve as joint connectors for gas springs used in lifting and holding applications.

Replaces worn ball strut connectors

These fittings act as a direct replacement for damaged or worn ball strut joints on existing gas springs. The upgrade is worth it when the original connector has stripped threads, corrosion, or excessive play that prevents the spring from holding position.

Simple thread-on installation

Each fitting threads onto an M8 male rod end and secures with the 8 mm hole for a pin or bolt. Common issues include cross-threading the M8 thread during fitting and using an incorrect pin diameter that allows lateral movement.

Highlights

  • A3 steel with zinc coating resists corrosion
  • M8 female thread fits standard gas spring studs
  • 8 mm hole accepts matching ball-end components
  • Five fittings supplied for complete installations
  • 110 g total weight keeps assemblies light

Specifications

BrandUnique Bargains

Questions about this item

Will the M8 female thread and 8 mm hole fit my existing gas spring ball stud?

The fitting has an M8 female thread and an 8 mm hole diameter, so it matches ball studs with those exact dimensions.

How do I install these end fittings without cross-threading the M8 thread?

Screw the M8 female thread onto the ball stud by hand until snug, then tighten lightly with a spanner; forcing it can strip the zinc-coated A3 steel threads.

When should I replace these zinc-coated A3 steel fittings?

Replace them if the zinc coating wears through, the threads feel loose on the ball stud, or the 8 mm hole shows elongation from repeated pivoting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.