Unique-Bargains
Unique-Bargains Fluorine Rubber O-Rings 14mm OD 11mm ID 1.5mm Green 10pcs
Fluorine rubber O-rings resist heat, fuel and chemicals from −20 °C to 250 °C for plumbing, hydraulic and pneumatic seals
- Fluorine rubber resists heat, fuel and chemicals
- Operates from -20 °C to 250 °C without degradation
- 14 mm outer diameter fits standard 11 mm bores
- 5 mm cross-section creates reliable compression seal
- Pack of ten rings covers multiple repair points
Fluorine Rubber O-Rings for Sealing
These fluorine rubber O-rings provide reliable sealing in plumbing, machinery, hydraulic and pneumatic systems. The material resists heat, fuel and common chemicals across a broad operating range. Each pack contains ten green rings with a 14mm outer diameter, 11mm inner diameter and 1.5mm cross-section. They suit maintenance tasks where elastomer compatibility is critical.
Temperature and Chemical Limits
The rings function continuously from -20°C up to 250°C without hardening or cracking. Fluorine rubber withstands exposure to oils, fuels and many industrial solvents that degrade standard nitrile seals. The 1.5mm cross-section limits the maximum groove depth and pressure differential the seal can sustain. Designers must verify gland dimensions against the stated inner and outer diameters.
Ten-Piece Capacity and Fit
A single pack supplies ten identical rings, enough for multiple joint reseals or a small production run. The 14mm outer diameter and 11mm inner diameter suit standard metric gland sizes, while the 1.5mm thickness determines compression set behaviour. Larger diameters, thicker cross-sections or higher quantity requirements exceed what this pack provides.
Highlights
- Fluorine rubber resists heat, fuel and chemicals
- Operates from -20 °C to 250 °C without degradation
- 14 mm outer diameter fits standard 11 mm bores
- 5 mm cross-section creates reliable compression seal
- Pack of ten rings covers multiple repair points
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
Should I pick the 14 mm OD version or a different size for my seal?
The listing supplies one size only — 14 mm outer diameter, 11 mm inner diameter, 1.5 mm cross-section — so choose it when those exact dimensions match your groove.
What does the 250 °C temperature rating mean once the ring is installed?
The fluorine rubber stays elastic and seals from -20 °C up to 250 °C, covering most automotive fluid and exhaust heat cycles.
Which standard governs the 1.5 mm cross-section and what pressure does it cap?
No industry standard is cited; the 1.5 mm cross-section simply defines the ring thickness for the stated 14 mm OD and 11 mm ID groove.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
