Unique-Bargains
Unique-Bargains EPM Rubber Seal Strip 10mm x 5mm x 5m Black
A 5-metre EPM rubber strip, 10 mm wide by 5 mm thick, seals gaps up to 70 °C and resists weather, dust, shock and noise
- 10 mm wide by 5 mm thick for tight gap sealing
- 5 metre continuous length covers long runs without joins
- EPM rubber resists heat up to 70 °C
- Weatherproof, dust-proof and sound-insulating in one strip
- Bonds to most surfaces with standard contact adhesive
Rubber Seal Strip 10 mm EPM 5 m
The Unique-Bargains EPM rubber strip is a solid rectangular profile measuring 10 mm wide, 5 mm thick and 5 metres long. It is supplied as a single continuous length for sealing gaps in automotive, appliance and general hardware applications. The black EPM material resists corrosion, dust and moisture while providing sound and heat insulation up to 70 °C.
Suits gap-filling and weatherproofing tasks
Builders needing a compressible foam tape or a self-adhesive backing should look elsewhere, as this strip requires a separate contact adhesive and has limited elasticity. Projects that demand continuous service above 70 °C or a softer, highly elastic seal will not be satisfied by this relatively hard cross-section.
Critical spec: 5 mm thickness and 70 °C limit
The 5 mm thickness determines whether the strip fits the intended groove or joint, while the 70 °C maximum temperature defines the safe operating envelope for engine bays, appliances or electronic enclosures. Verify both values against your design before purchasing.
Highlights
- 10 mm wide by 5 mm thick for tight gap sealing
- 5 metre continuous length covers long runs without joins
- EPM rubber resists heat up to 70 °C
- Weatherproof, dust-proof and sound-insulating in one strip
- Bonds to most surfaces with standard contact adhesive
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
How does the 10mm width and 5mm thickness perform once installed?
The solid EPM rubber provides a firm seal that resists dust, water and vibration while insulating against sound and heat up to 70 °C.
What adhesive standard does the strip rely on and what does that limit?
It requires a general-purpose contact adhesive; the bond quality depends on the adhesive chosen and the surface preparation.
What clearance is needed to fit the 10mm by 5mm profile?
The strip needs a gap at least 10mm wide and 5mm deep, and the 5-metre roll can be cut to the exact length required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
