Unique-Bargains
Unique-Bargains EPDM Trim Seal Top Bulb 3m 1-3mm Edge
EPDM rubber edge trim with a top bulb seals 1–3 mm edges over 9.84 ft and resists heat, ozone, water absorption, sunlight aging and low temperatures
- Weather-resistant EPDM withstands heat, ozone, UV and low temperatures
- Three-metre length seals long edges in a single piece
- Internal steel clips grip 1–3 mm edges without fasteners
- Push-on bulb profile installs quickly by hand
- Suits RV slides, boat hatches, toolboxes and storage containers
3-metre EPDM trim seal with top bulb
This new rubber edge trim from Unique-Bargains measures 3 metres (9.84 ft) long and fits panel edges from 1 mm to 3 mm thick. It combines an EPDM rubber body with internal steel clips to create a push-on seal that protects against weather, dust and impact. The co-extruded design suits automotive, marine, RV and general enclosure applications.
Fits 1-3 mm edge with 12 mm groove depth
The critical dimension is the 1-3 mm edge range paired with a 12 mm (0.47 in) groove depth; panels outside this thickness will not seat correctly on the internal steel clips. Overall profile height is 26 mm (1.02 in) with a 12 mm bulb height and 10 mm (0.39 in) base width, so verify clearance before ordering.
Suits builders sealing thin-edged hatches.
Installers needing a durable, push-on bulb seal for edges between 1 mm and 3 mm will find the steel-clip retention reliable. Buyers working with thicker panels, wider grooves or who require adhesive-backed strip instead of a mechanical clip should look at alternative profiles.
Highlights
- Weather-resistant EPDM withstands heat, ozone, UV and low temperatures
- Three-metre length seals long edges in a single piece
- Internal steel clips grip 1–3 mm edges without fasteners
- Push-on bulb profile installs quickly by hand
- Suits RV slides, boat hatches, toolboxes and storage containers
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
What does the 26 mm overall height mean once the seal is fitted to a panel?
The seal sits 26 mm (1.02 in) above the edge, giving a 12 mm (0.47 in) bulb plus the base that grips the metal.
How does the 1–3 mm edge range limit the fit in practice?
It grips panels between 1 mm and 3 mm thick; anything thinner slips out, anything thicker will not seat fully.
What clearance is needed for the internal steel clips to engage?
The groove depth is 12 mm (0.47 in), so allow at least that much space behind the edge for the clips to lock.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
