Unique-Bargains
Unique-Bargains Edge Trim U Seal White PVC 1/32''-3/32'' Grip 10ft
White PVC U-channel edge trim with iron reinforcement grips edges from .8 to 2.5 mm and runs 10 ft for automotive, trailer or marine sealing
- Protects edges on vehicles and equipment
- Flexible PVC with iron core resists wear
- Grips edges from .8 to 2.5 mm thick
- Ten-foot length covers long runs in one piece
- White finish blends with light-coloured panels
Edge Trim for Thin Edges
This PVC edge trim with an internal iron core fits panels from 0.8 mm to 2.5 mm thick. It is designed for automotive, caravan, trailer, tractor, motorbike, truck and lorry applications as well as hatches, lockers and metal doors. The 10-foot coil can be cut to the exact length required for each project.
Grip Range 0.8 to 2.5 mm
The single specification that decides fit is the grip range of 1/32 inch to 3/32 inch. Only edges within this thickness will seat securely in the U-shaped channel. Measure the panel before ordering because material outside this range will not hold.
PVC and Iron Construction
The PVC outer skin resists weather, UV and repeated washing while the iron core retains the channel shape under vibration. In normal use the trim stays flexible at low temperatures and does not soften in direct sunlight. No power draw or noise is produced because the product is a passive mechanical seal.
Highlights
- Protects edges on vehicles and equipment
- Flexible PVC with iron core resists wear
- Grips edges from .8 to 2.5 mm thick
- Ten-foot length covers long runs in one piece
- White finish blends with light-coloured panels
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
How much edge thickness does the 1/32''-3/32'' grip actually cover on a panel?
The U-channel clamps onto edges from .8 mm up to 2.5 mm thick, so it fits sheet metal, plastic or fibreglass panels within that range.
What does the PVC and iron construction mean for everyday use?
The PVC outer skin stays flexible for tight curves while the iron core holds its shape, giving a washable seal that resists cracking on vehicles and trailers.
Will the 7 mm wide by 10 mm high profile sit flush on a standard door flange?
The trim measures 7 mm across the face and 10 mm tall with an 8 mm deep groove, so it covers most door and hatch flanges without protruding.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
