Unique-Bargains
Unique-Bargains Edge Trim U Seal 20ft 1/16-3/32 Grip
Flexible PVC U-channel edging protects 1/16–3/32 in edges across 20 ft of automotive, marine or industrial panels
- Protects edges from damage with 1.5-2.5mm grip range
- 20ft continuous length covers large installations without joins
- Flexible PVC construction conforms to curves and corners easily
- Hard-wearing material resists wear and remains washable over time
- Universal fit for automotive, caravan and industrial applications
PVC Edge Trim for Vehicle Panels
This 20-foot U-channel seal fits edges between 1/16 and 3/32 inch thick. It suits automotive, caravan, trailer and industrial door applications where a flexible PVC protector is required. The trim slides on without adhesive and covers raw panel edges cleanly. Buyers needing a different grip range or a self-adhesive backing should look elsewhere.
Behaviour Under Sustained Load
The PVC construction remains flexible yet hard-wearing through repeated vibration, temperature swings and wash cycles. Its 10 mm height and 8 mm groove depth maintain grip on 1.5–2.5 mm panels without cracking or loosening over time. The material resists UV exposure and road grime in outdoor service. Installations subject to constant flexing beyond the stated grip range may see reduced retention.
Installation Notes
Push the channel onto the prepared edge by hand; no tools or fasteners are needed. Ensure the panel thickness stays within the 1/16–3/32 inch window or the seal will not seat fully. Cut to length with a sharp knife at the 13/64 inch width mark. Debris in the groove or oversized panel edges are the most common causes of poor fit.
Highlights
- Protects edges from damage with 1.5-2.5mm grip range
- 20ft continuous length covers large installations without joins
- Flexible PVC construction conforms to curves and corners easily
- Hard-wearing material resists wear and remains washable over time
- Universal fit for automotive, caravan and industrial applications
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
Does the PVC edge trim soften or sag in engine-bay heat after a full day of driving?
The PVC material is described as extremely hard wearing and washable, with a 10 mm height and 5 mm width that hold shape across the 1.5-2.5 mm grip range.
What panel thickness does the 1/16–3/32 inch grip actually fit without extra adhesive?
The U-channel groove depth is 8 mm and the grip range covers 1.5-2.5 mm panels, so edges within that thickness snap in securely.
Will the 20 ft roll bend tightly enough for a vintage motorcycle fairing with 10 mm radius corners?
The flexible PVC construction and 5 mm width allow tight curves while the 10 mm height maintains edge coverage on small-radius bends.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
