Unique-Bargains
Unique-Bargains Double Ball Head Gas Spring 150mm 15kg 33lb
A 150 mm stroke gas spring rated at 15 kg or 33 lb force supports hoods, lids and canopies with an 8 mm rod and 375 mm ball spacing
- 15 kg lift force for heavy lids and hatches
- 150 mm stroke gives wide opening range
- 375 mm ball spacing fits common mounting points
- 385 mm total length suits standard installations
- 8 mm rod diameter provides sturdy support
Gas spring for lids and hoods
This gas spring provides controlled lift and hold force for horizontally hinged doors, lids, hoods and canopies. It uses regulated gas and oil volume to manage operating speed during opening and closing cycles. The unit suits automotive and general garage applications where smooth motion support is required.
Fits 150 mm stroke and 15 kg force needs
Builders repairing or fitting liftgate struts with a 150 mm stroke and 15 kg force rating will find this unit matches those specifications. It is not for buyers who need a different stroke length, a higher or lower force rating, or a different end-fitting style than the double ball head provided.
150 mm stroke with 15 kg force
The 150 mm stroke and 15 kg (33 lb) force comfortably handle lids and panels within that travel and weight range. The 8 mm rod and 375 mm ball spacing define the mounting geometry. Applications exceeding the 150 mm travel or the 15 kg force requirement will exceed the design limits of this spring.
Highlights
- 15 kg lift force for heavy lids and hatches
- 150 mm stroke gives wide opening range
- 375 mm ball spacing fits common mounting points
- 385 mm total length suits standard installations
- 8 mm rod diameter provides sturdy support
Specifications
| Brand | Unique Bargains |
|---|
Questions about this item
What mounting points do I need to install this 150 mm stroke gas spring?
You need two ball-socket brackets spaced 375 mm (15 in) centre-to-centre that accept an 8 mm (0.31 in) ball stud.
Will this 15 kg force spring work with a lighter hatch I already have?
Yes, the 15 kg (33 lb) force will still extend the hatch, but you must ensure the hatch weight stays within that rating or the spring may not hold it open.
How can I confirm the spring is functioning correctly after fitting?
The hatch should lift smoothly through the full 150 mm stroke, stay open without drifting, and close at a controlled speed without slamming.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
