We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical DC vibration motor with two short wires, silver metal body, compact 6 by 19 mm size

Unique-Bargains

Unique-Bargains DC 3V 1100RPM 0.2A Mini Vibration Motor Grip

SKU CH-FTFY-RZB02

A compact 1100RPM vibration motor running on 3V DC with a 0.2A draw for DIY toys and haptic projects

  • Low power draw extends battery life with 0.2A current
  • High 1100RPM speed delivers strong vibration feedback
  • Compact 6mm diameter fits tight DIY spaces
  • Short 2cm cable keeps wiring neat in small builds
  • Light 3g weight adds minimal mass to portable devices

Product Identity

This Unique-Bargains mini vibration motor is a compact DC component designed for hobbyists and engineers building custom haptic feedback into small devices. It suits DIY toy makers, wearable prototypers and anyone adding tactile alerts to portable electronics.

Capacity and Headroom

Rated at 3 V with a 0.2 A draw and 1100 RPM, the motor delivers noticeable vibration for handheld gadgets while keeping power demand low. Its 6 mm diameter and 19 mm length fit tight enclosures, though the 2 cm lead length may require extension wires for some board layouts.

Interface Limits

The two-wire DC interface means speed and direction are fixed unless external circuitry is added; there is no built-in PWM or logic control. Builders needing variable intensity or bidirectional drive must add their own driver stage, and the short cable restricts placement without soldering.

Highlights

  • Low power draw extends battery life with 0.2A current
  • High 1100RPM speed delivers strong vibration feedback
  • Compact 6mm diameter fits tight DIY spaces
  • Short 2cm cable keeps wiring neat in small builds
  • Light 3g weight adds minimal mass to portable devices

Specifications

BrandUnique Bargains

Questions about this item

Will this 6 mm diameter motor fit inside the same housing as the 10 mm unit I am replacing?

The motor body measures 6 mm in diameter and 19 mm long, so it is narrower than a 10 mm part and will need a smaller mounting hole or an adapter sleeve.

How can I confirm the motor is running at the rated 1100 RPM after I solder the leads?

Apply 3 V DC and measure current draw; it should read about 0.2 A, and the shaft vibration frequency will correspond to 1100 RPM.

Does the package include a connector or mounting bracket, or do I need to source them separately?

Only the motor with a 2 cm cable is supplied; connectors, brackets and any drive circuitry must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.