We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Unique-Bargains

Unique-Bargains Carbon Brushes 11mm x 6mm x 4mm Set of 10

SKU CH-J2YY-25RZH

Set of 10 carbon brushes measuring 11 x 6 x 4 mm with 20 mm springs for replacing worn motor brushes in power tools

  • Set of 10 brushes keeps spares on hand
  • 11 mm x 6 mm x 4 mm fits many motor slots
  • 20 mm spring maintains firm contact
  • Replaces worn brushes to restore motor power
  • Replace every 60 hours for reliable operation

Replacement Carbon Brushes

A set of ten carbon brushes sized 11mm by 6mm by 4mm with a 20mm spring length. They are designed to restore motor function in a range of power tools and electric motors where the original brushes have worn down.

When to Replace Worn Brushes

Worn brushes cause intermittent motor function, reduced electric braking and reduced motor power. The supplier notes replacement every 60 hours of use. The jump is worth it when the tool shows these symptoms or has reached that interval.

Fitting Into a Repair

Each brush measures approximately 0.43 by 0.24 by 0.16 inches. The pack of ten covers multiple replacements or several tools. Verify the dimensions match the motor housing before fitting; no other parts are included.

Highlights

  • Set of 10 brushes keeps spares on hand
  • 11 mm x 6 mm x 4 mm fits many motor slots
  • 20 mm spring maintains firm contact
  • Replaces worn brushes to restore motor power
  • Replace every 60 hours for reliable operation

Specifications

BrandUnique Bargains

Questions about this item

Will these 11 mm x 6 mm x 4 mm brushes fit my motor's holder?

Measure the existing brush cavity; these are 11 mm long, 6 mm wide and 4 mm thick, so the holder must accept those exact dimensions.

How do I install the 10 carbon brushes with the 20 mm springs correctly?

Slide each brush into its holder so the spring seats fully behind it; the common mistake is leaving the spring cocked sideways, which prevents contact.

When should I replace the set again if I follow the 60 hour guideline?

Plan on a fresh set after every 60 hours of motor run time; worn brushes cause intermittent running and loss of braking.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.