We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two brass tubes, 10mm diameter, 300mm long, thin-walled, smooth finish

Unique-Bargains

Unique-Bargains Brass Round Tube 10mm OD 0.2mm Wall 300mm Length 2 Pcs

SKU CH-5KQJ-CQZ8T

Two seamless brass tubes, 10 mm outer diameter and 0.2 mm wall, each 300 mm long, with a passivated finish for corrosion resistance

  • MaterialBrass
  • Seamless interior ensures smooth flow and precision
  • Brass construction delivers high strength and weldability
  • Passivation finish resists oxidation and corrosion
  • Cut and weld to custom lengths as needed
  • Two 300 mm tubes ready for DIY projects

Brass round tube 10mm OD 0.2mm wall

This brass tube has a 10mm outer diameter with a 0.2mm wall thickness. Each piece is 300mm long and the pack contains two tubes. The seamless construction gives a smooth interior bore. A passivated finish adds oxidation and corrosion resistance.

Hobbyists needing thin-wall brass stock

The 0.2mm wall suits light structural work, model frames and decorative builds where weight matters. It can be cut to length and welded with appropriate equipment. Builders requiring thicker walls for pressure containment or heavy loads should look elsewhere.

10mm outer diameter with 0.2mm wall

This single dimension decides fit in jigs, bearings or scale-model parts. The seamless bore and passivated surface support precision use. Verify the 10mm OD and 0.2mm wall against your design before ordering.

Highlights

  • Seamless interior ensures smooth flow and precision
  • Brass construction delivers high strength and weldability
  • Passivation finish resists oxidation and corrosion
  • Cut and weld to custom lengths as needed
  • Two 300 mm tubes ready for DIY projects

Specifications

MaterialBrass
BrandUnique Bargains

Questions about this item

What clearance is needed for the 10 mm outer diameter brass tube?

The tube has a 10 mm outer diameter and 0.2 mm wall thickness, so a 10 mm hole or clamp is required for a snug fit.

How do I cut and join the 300 mm brass tube without crushing the thin wall?

Use a fine-tooth tubing cutter, rotate slowly to avoid flattening the 0.2 mm wall, deburr inside, then TIG-braze or soft-solder with flux suited to passivated brass.

Will the passivated finish on the 10 mm brass tube need re-coating for outdoor use?

The passivation gives oxidation and corrosion resistance; inspect yearly and re-apply a clear brass lacquer or wax if the surface dulls in harsh weather.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.