We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear plastic inline ANL fuse holder with gold terminals and two 50A fuses

Unique-Bargains

Unique-Bargains ANL Fuse Holder Clear 0 4 8 10 Gauge 50A

SKU CH-XBHP-N8JPG

Inline ANL fuse holder accepts 0, 4, 8, 10 gauge cable and includes two 50A fuses for 32V DC protection

  • TypeFuse Holders
  • Protects audio systems with 50A ANL fuse rating
  • Transparent cover shows internal fuse status at a glance
  • Waterproof construction shields connections from moisture ingress
  • Accepts 0 4 8 10 gauge cables for flexible wiring
  • Includes two 50A fuses ready for immediate installation

Transparent ANL Fuse Holder for Car Audio

This transparent ANL fuse holder accepts 0 4 8 10 gauge cable and includes two 50A fuses. It is designed for car audio amplifiers and similar DC 32V systems. The clear cover lets you inspect the internal fuse and connections at a glance. Gold-tone plated metal contacts provide reliable conductivity for automotive and marine installations.

Thermals Noise and Power Draw

The holder carries up to 50 amps at DC 32 volts without active cooling. No fan or moving parts are present so operation is completely silent. Heat dissipation relies on the metal contact surfaces and the open design of the fuse block. Power draw is limited to the protected circuit itself with no additional overhead from the holder.

Upgrade and Replacement Context

This kit replaces a damaged or missing inline fuse holder on amplifier power leads. The jump is worth it when the existing holder shows melted contacts, corrosion or a cracked housing. It also suits new amplifier installs where a transparent, waterproof block simplifies inspection. Builders needing a higher amperage rating or a different fuse type such as MAXI or MIDI will need a different product.

Highlights

  • Protects audio systems with 50A ANL fuse rating
  • Transparent cover shows internal fuse status at a glance
  • Waterproof construction shields connections from moisture ingress
  • Accepts 0 4 8 10 gauge cables for flexible wiring
  • Includes two 50A fuses ready for immediate installation

Specifications

BrandUnique Bargains
TypeFuse Holders

Questions about this item

How do I wire the M8x1.25 terminals and which 0/4/8/10 gauge cable fits the 4 mm base hole?

Strip the cable, insert it through the 4 mm base hole, and tighten the M8x1.25 set screws; the holder accepts 0, 4, 8 or 10 gauge wire.

When should the two included 50 A ANL fuses be replaced?

Replace a fuse only after it blows — visible through the transparent cover — then swap in the spare 50 A ANL fuse from the pack.

At what voltage will the 50 A rating cease to protect the circuit during a long overload?

The holder is rated for DC 32 V; sustained overloads above 50 A at or below 32 V will open the fuse, but voltages above 32 V exceed its rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.