We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver aluminum rectangular resistor housing with wire leads and mounting tabs, 33 x 6 x 3cm

Unique-Bargains

Unique-Bargains Aluminum Housing Wirewound Braking Resistor 1000W 20ohm

SKU CH-H6MS-6YXYA

Aluminium-housed wirewound braking resistor rated at 1000 W and 20 Ω with ±5 % tolerance, measuring 33 × 6 × 3 cm and weighing 1037 g

  • Featurespower supply;transducer;elevator;heat;good performance
  • High power handling with 1000 W rated capacity
  • Effective heat dissipation via aluminium housing
  • Precise resistance at 20 Ω ± 5 % tolerance
  • Durable construction with nylon-wrapped wire and solder lug terminals
  • Compact footprint measuring 33 × 6 × 3 cm

High-Power Braking Resistor

This 1000W wirewound braking resistor with a 20 Ohm rating is built for industrial power systems. It serves engineers and technicians managing energy dissipation in power supplies, transducers and elevator drives where reliable heat handling is essential.

Thermal Capacity and Limits

The aluminum housing provides effective heat radiation for continuous high-load operation. Rated at 1000W with a ±5% tolerance, it handles sustained braking cycles but will reach thermal limits if peak power or duty cycle exceeds the specified rating.

Aluminum Housed Integration

Measuring 33 x 6 x 3cm with 0.9 x 0.6cm mounting holes, the unit fits standard industrial enclosures. Solder lug terminals on 36cm nylon-wrapped leads simplify wiring, while the housed design frees internal space by moving heat dissipation to the external aluminum surface.

Highlights

  • High power handling with 1000 W rated capacity
  • Effective heat dissipation via aluminium housing
  • Precise resistance at 20 Ω ± 5 % tolerance
  • Durable construction with nylon-wrapped wire and solder lug terminals
  • Compact footprint measuring 33 × 6 × 3 cm

Specifications

BrandUnique Bargains
Featurespower supply;transducer;elevator;heat;good performance

Questions about this item

Will the 33 cm length and 0.9 cm mounting holes fit my existing enclosure?

The resistor measures 33 cm long with mounting holes sized 0.9 cm by 0.6 cm, so check your enclosure’s internal clearance and hole pattern before installing.

How can I verify the 20 ohm resistor is operating correctly after wiring?

Measure the resistance across the solder lug terminals with a multimeter; it should read within ±5 % of 20 ohm, and the aluminum housing should warm evenly under load without hot spots.

Does the package include mounting hardware or cables, or must I source them separately?

The box contains only the 1037 g aluminum housed braking resistor with 36 cm nylon wrapped leads and solder lug terminals; screws, washers and any additional wiring are not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.